波音737飞机D357高强薄壁舱门铸铝件开发  

Technical Requirement Analysis of D357 Cast Aluminum for High Strength Thin-wall Hatch Doors in Boeing 737 Airplane

作　　者：闫卫平 李桂成 修继 郭如意 王志 刘阳 李兴飏 刘帅 Yan Weiping;Li Guicheng;Xiu Ji;Guo Ruyi;Wang Zhi;Liu Yang;Li Xingchang;Liu Shuai(Shenyang Chuangxin Alloy Co.,Ltd.)

机构地区：[1]沈阳创新合金有限公司

出　　处：《特种铸造及有色合金》2023年第5期712-716,共5页Special Casting & Nonferrous Alloys

摘　　要：针对波音737飞机2 mm壁厚舱门铸铝件的技术要求,研究了其对铸造铝合金材料和本体的力学性能指标、铸件的内部和表面品质要求、铸件的尺寸精度以及表面粗糙度的要求,并且对比了HB963和HB5480两种铸铝材料和铸件的各项指标要求。从对比数据来看,波音飞机采用的材料力学性能比目前我国相似材料高约17%,铸件品质要求更高。In view of the technical requirement of aluminum cast door in Boeing 737 airplane with thickness of 2 mm,the requirements of mechanical properties,inner quality and surface quality,dimensional tolerance and roughness of cast aluminum alloy on boeing doors were described,and index requirements of HB963 and HB5480 similar aluminum alloy were analyzed comparatively.The results indicate that the mechanical properties of Boeing cast alloy is about 17%higher than the domestic similar cast alloy,with higher quality requirement.

关 键 词：飞机 铸造舱门 铸铝 高强 D357 

分 类 号：TG249.2[金属学及工艺—铸造] TG146.21[一般工业技术—材料科学与工程] V25[金属学及工艺—金属材料]