检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:亢军 KANG Jun(Shanxi Lu’an Group Luning Mengjiayao Coal Industry Co.,Ltd.,Xinzhou 036700,China)
机构地区:[1]山西潞安集团潞宁孟家窑煤业有限公司,山西忻州036700
出 处:《煤矿机电》2023年第1期56-59,共4页Colliery Mechanical & Electrical Technology
摘 要:为研究厚冲击层薄基岩下工作面支架的额定阻力,以3211综采工作面为研究背景,通过现场工程地质调查、理论分析、数值模拟等手段,确定工作面上覆基岩种类,研究工作面垮落带及导水裂隙带高度,确定工作面支架的额定工作阻力。研究结果表明:工作面上覆基岩为薄基岩,理论分析与数值模拟得出的工作面垮落带高度与导水裂隙带高度相近,并以此为依据得出支架支护强度为1.3 MPa,额定工作阻力为8 190 kN。In order to study the rated resistance of the support of the working face under thick impact layer and thin bedrock,with the 3211 fully mechanized mining face as the research background,the type of overlying bedrock on the working face was determined through on-site engineering geological investigation,theoretical analysis,numerical simulation,and other means.The height of the collapse zone and water conducting crack zone of the working face was studied to determine the rated working resistance of the support of the working face.The research results indicated that the overlying bedrock on the working face was thin bedrock,and the height of the collapse zone of the working face obtained from theoretical analysis and numerical simulation was similar to the height of the water conducting crack zone.Based on this,the support strength of the bracket was 1.3 MPa,and the rated working resistance was 8190 kN.
关 键 词:厚冲积层薄基岩 综采工作面 导水裂隙带 液压支架 工作阻力
分 类 号:TD745[矿业工程—矿井通风与安全]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.26