高速永磁屏蔽电机摩擦损耗分析与计算  

Analysis and Calculation of Friction Loss of High-Speed Permanent Magnetic Shielding Motor

作　　者：张文校 胡岩[1] 曹力 卓亮 刘爱民[1] Zhang Wenxiao;Hu Yan;Cao Li;Zhuo Liang;Liu Aimin(School of Electrical Engineering,Shenyang University of Technology,Shenyang 110870,China;Guizhou Aerospace Linquan Motor Co.Ltd,Guiyang 550008,China)

机构地区：[1]沈阳工业大学电气工程学院,沈阳110870 [2]贵州航天林泉电机有限公司,贵阳550008

出　　处：《电工技术学报》2023年第12期3122-3129,共8页Transactions of China Electrotechnical Society

基　　金：国家自然科学基金资助项目(511777131)。

摘　　要：基于3D流体场模型和有限元体积法,针对高速永磁屏蔽电机进行转子表面介质摩擦损耗计算和敏感性因素分析,研究转子转速、介质轴向流速、屏蔽套表面粗糙度对气隙内介质摩擦损耗的影响规律。基于一台额定转速36000 r/min的电机结构,对半径比为0.896~0.930的窄气隙泰勒-库埃特-泊肃叶(TCP)流进行仿真分析,得到摩擦阻力系数与水轴向流速、转子转速的关系,并采用非线性拟合的方法得出不同轴向流速和转子转速的摩擦损耗系数经验公式。随后,搭建试验平台测量摩擦损耗,对比试验测得与仿真求得的摩擦损耗大小以及数值仿真与经验公式计算的摩擦损耗系数,误差在5%范围内,满足工程要求,验证了数值仿真分析和经验公式的准确性。In order to obtain the water friction loss and its influencing factors on the rotor surface,a high-speed permanent magnet shielding motor was taken as the research object.Based on the fluid dynamics governing equations and the finite element volume method,through the reasonable setting of the Fluent fluid simulation program,the air gap water friction loss and fluid field distribution of the motor were calculated at room temperature(25℃)and standard working conditions.According to the same principle of simulation design and the single variable principle,the influence of rotor speed,shield roughness,and air gap inlet flow velocity on the friction loss of water in the air gap was studied.The results show that the water friction loss is proportional to the 2.88 power of the rotor speed.In the process of increasing motor speed,the flow state of water has a great change that from uniform laminar flow to stable turbulence,and the normal Taylor vortices appear.The water friction loss increases with the roughness of the rotor shield,which is approximately twice that caused by changing the roughness of the stator shield under the same condition.Moreover,the surface roughness of the rotor side has more influence on friction loss.The friction loss increases with the increase of flow velocity,and the loss almost increases linearly with the rotor speed.Four parameter models were established to study the influence of the coupling effect of rotational flow and axial flow on the friction coefficient.Based on the original empirical formula of friction loss,the inlet velocity and rotor speed are represented by dimensionless Reynolds numbers.By the simulation analysis of narrow-gap Taylor-Couette-Poiseuille(TCP)flow with a radius ratio of 0.896 to 0.930,the loss coefficient relationship with the axial Reynolds number and rotational Reynolds number was drawn.The results show that under the premise of a single variable,the friction loss coefficient increases with the increase of axial Reynolds number and decreases with the increase

关 键 词：高速永磁屏蔽电机 水摩擦损耗 摩擦系数经验公式 TCP 流 

分 类 号：TM355[电气工程—电机]