预铺防水卷材主体片材分切弯曲现象的探讨与改进  

Discussion and Improvement on Bending Phenomenon of the Main Sheet of Pre-laid Waterproofing Membrane during Slitting

作　　者：袁军 许家成 侯明星 冯子宽 项晓睿 Yuan Jun;Xu Jiacheng;Hou Mingxing;Feng Zikuan;Xiang Xiaorui(Zhejiang Luban Building Materials Technology Co.,Ltd.,Deqing,Zhejiang313200,China;Zhuji Anshun Group Co.,Ltd.,Zhuji,Zhejiang213300,China)

机构地区：[1]浙江鲁班建材科技股份有限公司,浙江德清313200 [2]诸暨市安顺集团有限公司,浙江诸暨213300

出　　处：《中国建筑防水》2023年第6期47-52,55,共7页China Building Waterproofing

摘　　要：通过研究预铺防水卷材主体片材的生产工艺参数,分析了其对卷材分切弯曲的影响,并采取正交试验设计方法确定找到大致工艺参数,再结合实际生产经验、能耗、生产效率对各工艺参数进行微调整,以确定最优加工方案,最终有效降低了预铺卷材分切过程的弯曲程度,将弯曲程度控制在合理范围,从而减少因卷材分切弯曲对施工的影响。By studying the production process parameters of the main sheet of pre-laid waterproofing membrane,this article analyzes influences of parameters on the curving of the membrane during slitting.Orthogonal experimental design method is used to determine the approximate process parameters,and then combined with actual production experience,energy consumption,and production efficiency,micro adjustments are made to each process parameter to determine the optimal processing plan.Ultimately,the curving degree of the pre-laid membrane during slitting process is effectively reduced,and is controlled within a reasonable range.Thereby the impact of cutting caused membrane curving on construction is reduced.

关 键 词：预铺防水卷材 分切弯曲 生产工艺参数 正交试验 

分 类 号：TH136[机械工程—机械制造及自动化]