某型轴承双半保持架合套工装改进  

Improvement of Combination Tooling for Double-Half Cages of a Type of Bearings

作　　者：李俊茹 LI Junru(Motor Branch,Harbin Bearing Group Co.,Ltd.,Harbin 150025,China)

机构地区：[1]哈尔滨轴承集团有限公司电机分厂,哈尔滨150025

出　　处：《哈尔滨轴承》2023年第2期23-24,27,共3页Journal of Harbin Bearing

摘　　要：某型轴承组合保持架工序由于没有专用的工装,只能手工操作,致使操作人员劳动强度大,同时不能保证双半保持架完全组合到位,极易造成组合后成品轴承旋转灵活性不好或出现卡滞的现象。针对上述质量问题重新设计了一套压装双半保持架的工装,该工装结构简单、实用,既保证了产品质量又减轻了操作人员的劳动强度。Due to the lack of special tooling for combining the cage of a type of bearings,it can only be manually operated and results in high labor intensity for operators.At the same time,it cannot guarantee that the double-half cages are fully assembled in place,which is prone to poor rotation flexibility or jamming of the finished bearing after assembly.A set of tooling for pressing double-half cages has been designed to address the above quality issues.The tooling has a simple and practical structure,ensuring product quality while reducing the labor intensity of operators.

关 键 词：双半保持架 组合 专用工具 

分 类 号：TH133.33[机械工程—机械制造及自动化] TG95[金属学及工艺—钳工工艺]