磁悬浮保护轴承表面镀层试验研究  

Research on Surface Coating Technology for Magnetic Suspension Protective Bearing

作　　者：南建辉 张志华 阎昌春 吴俊成 NAN Jianhui;ZHANG Zhihua;YAN Changchun;WU Juncheng(Hangzhou C&U Bearing Co.,Ltd.,Hangzhou 310022,China;Hangzhou C&U Motor Bearing Co.,Ltd.,Hangzhou 310022,China)

机构地区：[1]杭州人本轴承有限公司,杭州310022 [2]杭州人本电机轴承有限公司,杭州310022

出　　处：《哈尔滨轴承》2023年第2期43-44,共2页Journal of Harbin Bearing

摘　　要：通过对磁悬浮保护轴承使用工况进行研究,确定了几种不同的镀层并进行了相应的试验。试验结果表明复合二硫化钼-2镀层的保护轴承温升最低,磨损最小。Through research on the application of magnetic suspension protective bearing,several different coatings were identified and corresponding tests were conducted.The test results show that compound MS2-2 protective bearing has the lowest temperature rise and the minimum wear than other coating bearings.

关 键 词：磁悬浮保护轴承 镀层 试验研究 

分 类 号：TH133.3[机械工程—机械制造及自动化] TG174.4[金属学及工艺—金属表面处理]