白云鄂博矿渣制备微晶玻璃制备工艺的优化  

Optimization of the preparation process of glass-ceramics prepared from Bayan Obo slag

作　　者：刘嘉 王艺慈[1] 赵凤光[1] 罗果萍[1] 柴轶凡[1] 安胜利[1] LIU Jia;WANG Yici;ZHAO Fengguang;LUO Guoping;CHAI Yifan;AN Shengli(Materials and Metallurgy School,Inner Mongolia University of Science and Technology,Baotou 014010,China)

机构地区：[1]内蒙古科技大学材料与冶金学院,内蒙古包头014010

出　　处：《内蒙古科技大学学报》2023年第1期53-57,97,共6页Journal of Inner Mongolia University of Science and Technology

基　　金：“固废资源化”国家重点研发计划资助项目(2020YFC1909105);内蒙古自治区科技成果转化专项资助项目(2019CG073);白云鄂博稀土矿产资源基地固废循环利用集成示范资助项目(2021ZD0016).

摘　　要：以包钢高炉渣和白云鄂博萤石尾矿为主要原料,采用烧结法制备矿渣微晶玻璃,通过正交试验优化微晶玻璃的抗折强度.结果表明:影响微晶玻璃抗折强度的因素主次顺序为原料粒度、烧结温度、制样压强、烧结时间.最优工艺条件为烧结温度975℃、烧结时间0.5 h、制样压强6 MPa、原料粒度过200网目筛;抗折强度达到104.76 MPa;制备的矿渣微晶玻璃主晶相为透辉石,晶粒形貌较为规整,呈树枝状,晶粒约1~2μm,分布较为均匀;尾矿和炉渣固废利用率达58%;试样达到B类装饰装修材料的放射性限制水平.Slag glass-ceramics using blast furnace slag and fluorite tailings as major raw materials was produced by the sintering method,and the flexural strength of glass-ceramics was optimized by orthogonal test.The results show that the order of influence factors on the bending strength is the particle size of the raw material,the sintering temperature,suppressing pressure and the sintering time;the optimal process conditions are as follows:sintering temperature 975℃,sintering time 0.5 h,pressure 6 MPa,and particle size over 200 meshes;the bending strength reaches 104.76 MPa;the main phase of the glass-ceramics is diopside,and the crystal shape of glass-ceramics is relatively regular and dendritic,with grains of about 1-2μm and relatively uniform distribution;the utilization rate of tailings and slag solid waste is 58%.The sample reaches the radioactive limit level of Class B decorative decoration materials.

关 键 词：高炉渣 萤石尾矿 微晶玻璃 热处理 正交试验 透辉石 

分 类 号：TQ171.9[化学工程—玻璃工业]