极地船舶装备气电立焊的焊缝接头性能分析  

Performance Analysis of Weld Joints for Electrogas Welding of Polar Ship Equipment

作　　者：江泽新 韦青嵩 段正启 刘鑫 JIANG Zexin;WEI Qingsong;DUAN Zhengqi;LIU Xin(Guangzhou Shipyard International Co.,Ltd.,Guangzhou 511462,China)

机构地区：[1]广船国际有限公司,广州511462

出　　处：《船舶》2023年第3期135-145,共11页Ship & Boat

摘　　要：极地船舶长年行驶于低温的极地环境,且时常遭受浮冰撞击,其焊缝接头要求具备较高的综合性能。文中对极地船舶装备气电立焊(EGW)的焊缝组织和性能、残余应力和变形进行系统研究分析,优化EGW的焊接工艺,提高焊接接头的可靠性,降低焊接变形和残余应力,助力极地船舶高效焊接工艺推广应用。研究结果表明:坡口间隙增大线能量升高,焊缝低温韧性稳定性降低,热影响区低温韧性显著下降,焊缝的残余应力和变形显著增大。采用氧化物冶金、氧化冶金等技术研制的大线能量钢板,可有效提高热影响区的低温韧性,提高焊接接头的可靠性。Polar ships sail in low-temperature Polar Regions all year round and are often collided with floating ices.The welding joints of polar ships therefore demand high comprehensive performance.The microstructure and mechanical properties,residual stress and deformation of the electrogas welding(EGW)are systematically analyzed for the polar ship equipment.The optimization of the welding process of the EGW,improvement of the reliability of the welding joints and reduction of the welding deformation and residual stress promote the application of efficient welding processes for polar ships.The results show that with the increase of groove gap,the linear energy increases,the low-temperature toughness stability of the weld decreases,and the low-temperature toughness of the heat-affected zone decreases significantly,as well as the residual stress and deformation of the weld increase significantly.The large heat input steel plate developed by the technologies of oxide metallurgy or oxidation metallurgy can effectively improve the low-temperature toughness of the heat-affected zone and the reliability of the welding joints.

关 键 词：极地船舶 焊接装配 气电立焊 冲击韧性 断裂韧性 可靠性 有限元分析 

分 类 号：U671.83[交通运输工程—船舶及航道工程]