热等静压工艺参数对TA15钛合金组织及性能的影响  

Effects of Hot Isostatic Pressing Parameters on Microstructure and Properties of TA15 Titanium Alloy

作　　者：孙志雨 莫晓飞 李亚峰 丁贤飞 南海 Sun Zhiyu;Mo Xiaofei;Li Yafeng;Ding Xianfei;Nan Hai(Beijing Engineering Research Center of Advanced Titanium Alloy Precision Forming Technology,Beijing Institude of Aeronautical Materials)

机构地区：[1]北京航空材料研究院,北京市先进钛合金精密成型工程技术研究中心,北京100095

出　　处：《特种铸造及有色合金》2023年第6期804-807,共4页Special Casting & Nonferrous Alloys

摘　　要：采用热等静压方法成形TA15粉末预合金,系统研究了热等静压工艺参数(温度、时间、压力)对合金显微组织及性能的影响。结果表明,TA15合金的抗拉强度、屈服强度随炉内压力、保温时间与温度的增加均呈现先升高后降低的变化;而伸长率、断面收缩率随压力升高、时间的延长呈先降低后升高的趋势,随温度的升高先升高后降低。当热等静压工艺为930℃×130 MPa×3 h时,TA15合金组织为典型的网篮组织,板条间距与等轴α晶粒含量较低,其抗拉强度可达952.3 MPa,伸长率可达17.1%,屈服强度为866.3 MPa,断面收缩率为47.9%,性能接近锻件水平。TA15 pre-alloying powder forming was conducted by hot isostatic pressing.The effects of hot isostatic pressing parameters including temperature,time and pressure on microstructure and properties were systematically investigated.The results indicate that tensile strength and yield strength are increased at first and then decreased with the increase of elevated pressure,holding time and temperature,while elongation and reduction of area also presents a contrary tendency with the increase of elevated pressure and holding time,and a similar tendency with the temperature increasing.At the parameter for 930℃ X130 MPa X3 h,the microstructure of TA15 alloy is characterized by net basket structure with the smaller slat spacing and content of equiaxedαgrain,where the average tensile strength,yield strength,elongation and reduction of area are 952.3 MPa,866.3 MPa,17.1%and 47.9%,respectively,reaching the level of forgings.

关 键 词：热等静压 TA15合金 组织 性能 

分 类 号：TG146.23[一般工业技术—材料科学与工程] TG156[金属学及工艺—金属材料]