基于Isight平台的橡胶材料超弹模型参数优化  

Parameter optimization of superelastic model of rubber materials based on Isight platform

作　　者：丁军[1,2] 索双富 李娟娟[1,2] 刘琛 徐长杰[1,2] DING Jun;SUO Shuangfu;LI Juanjuan;LIU Chen;XU Changjie(School of Emergency Equipment,North China Institute of Science and Technology,Langfang 065201,China;Hebei Key Laboratory of Safety Monitoring of Mining Equipment,Langfang 065201,China;Department of Mechanical Engineering,Tsinghua University,Beijing 100084,China)

机构地区：[1]华北科技学院应急装备学院,河北廊坊065201 [2]河北省矿山设备安全监测重点实验室,河北廊坊065201 [3]清华大学机械工程系,北京100084

出　　处：《弹性体》2023年第2期25-30,共6页China Elastomerics

基　　金：河北省高等学校科学研究项目(ZC2023153,ZD2021419);河北省高等教育教学改革研究与实践项目(2022GJJG480);廊坊市科学技术研究与发展计划项目(2021011051)。

摘　　要：超弹模型及参数的选择对于橡胶制品仿真计算结果的准确性有着重要的影响。对三元乙丙圆柱形橡胶试样进行单轴压缩实验,利用不同的超弹模型对实验值进行拟合,建立与实验条件一致的仿真模型,来判断不同超弹模型计算准确性。基于Isight优化平台,选择序列二次规划(NLPQL)算法对拟合的超弹模型参数进一步优化,利用优化后参数进行仿真计算。结果表明,优化参数仿真计算结果与实验值具有很好的一致性,其能够更准确地描述橡胶材料的超弹特性。The selection of the superelastic model and parameters has important influence on the accuracy of the simulation results of rubber products.The uniaxial compression experiment of EPDM cylindrical rubber samples is carried out.The experimental values are fitted by different superelastic models,and the simulation models consistent with the experimental conditions are established to judge the calculation accuracy of different superelastic models.Based on the Isight optimization platform,NLPQL algorithm is selected to further optimize the fitting parameters of the superelastic model,and the optimized parameters are used for simulation calculation.The results show that the simulation results of the optimized parameters are in good agreement with the experimental values,which can more accurately describe the superelastic characteristics of the rubber material.

关 键 词：橡胶材料 超弹模型 单轴压缩 有限元分析 Isight软件 优化 

分 类 号：TQ330.1[化学工程—橡胶工业]