A novel mechanism fusion data control method for slab camber in hot rolling  

作　　者：Le-bao Song Dong Xu Peng-fei Liu Jin-hang Zhou Hui-qing Yan Jing-dong Li Hai-nan He Hai-jun Yu Xiao-chen Wang Quan Yang 

机构地区：[1]National Engineering Technology Research Center of Flat Rolling Equipment,University of Science and Technology Beijing,Beijing 100083,China [2]Xinjiang Joinworld Co.,Ltd.,Urumqi 830000,Xinjiang,China [3]2250 Hot Strip Mill,Hunan Lianyuan Iron and Steel Co.,Ltd.,Loudi 417000,Hunan,China

出　　处：《Journal of Iron and Steel Research International》2023年第5期960-970,共11页

基　　金：financially supported by the National Key Research and Development Plan(Grant No.2020YFB1713600);Xinjiang Science and Technology Assistance Program(Grant No.2021E02060);the National Natural Science Foundation of China(Grant No.51975043);the Fundamental Research Funds for the Central Universities(Grant No.FRF-TP-20-105A1).

摘　　要：For asymmetric plate shape,control over the hot rolling process mainly depends on the subjective judgement and personal experience of the operator as there are great deviations and much instability in hot rolling.Unfortunately,the intrinsic mechanisms and sensitivity affecting characteristic parameters and variables in the asymmetric rolling process remain understudied.Therefore,a novel mechanism fusion data control method for slab camber in hot rolling using dimensional analysis and data-driven technique was proposed.The approach of dimensional analysis was used to establish a mathematical model and analyse the main parameters affecting the slab camber of the rough rolling.Subsequently,the established mathematical model combined with the data-driven techniques was employed to accurately predict the slab bending value.Furthermore,the superiority and effectiveness of the proposed model were demonstrated by a comparison with three regression models.Finally,the proposed control strategy was successfully applied in a 1580 mm hot rolling industrial process.The automatic control results show that the hit rate of slab cambers in different sizes from 10 to 30 mm is improved,and the quality stability of intermediate slab is significantly improved.

关 键 词：Mechanism model Dimensional analysis Data-driven technique Camber control Hot rolling 

分 类 号：O17[理学—数学]