n-CeO_(2)与CTBN/EP共混增韧改性及其机理研究  

Toughening modification of epoxy resin(EP)by blending with n-CeO_(2)and CTBN/EP and its mechanism

作　　者：梁大宇 杨俊东 王文智 路智敏[1] LIANG Dayu;YANG Jundong;WANG Wenzhi;LU Zhimin(School of Chemical Engineering,Inner Mongolia University of Technology,Hohhot 010051,China)

机构地区：[1]内蒙古工业大学化工学院,呼和浩特010051

出　　处：《内蒙古工业大学学报（自然科学版）》2023年第3期225-229,共5页Journal of Inner Mongolia University of Technology：Natural Science Edition

基　　金：国家自然科学基金项目(11962022)。

摘　　要：采用物理共混的方法制备以端羧基丁腈橡胶(CTBN)和纳米二氧化铈(n-CeO_(2))为增韧剂对环氧树脂(EP)进行增韧的复合材料,利用XRD、FTIR、SEM及万能拉伸试验仪,研究了在15 phrCTBN下不同n-CeO_(2)含量对复合材料力学性能的影响。结果表明,当n-CeO_(2)含量为5 phr时增韧效果最好,n-CeO_(2)-CTBN/EP的拉伸强度达73.2 MPa,弯曲强度达191.4 MPa,冲击强度达31.1 KJ/m^(2),较未添加n-CeO_(2)的CTBN/EP分别提高了16.1%、112%、42.2%。The composites of epoxy resin(EP)toughened with the toughening agents of carboxy terminated butadiene acrylonitrile copolymers(CTBN)and nano-cerium dioxide(n-CeO_(2))were prepared by physical blending methods.The effects of different n-CeO_(2)contents on the mechanical properties of the composites at 15 phr CTBN were investigated using XRD,FTIR,SEM and the universal tensile tester.The results showed that the best toughening effect was achieved when the n-CeO_(2)content was 5 phr.The tensile strength of n-CeO_(2)-CTBN/EP reached 73.2 MPa,bending strength reached 191.4 MPa,and impact strength reached 31.1 KJ/m^(2),which were 16.4%,112%,and 42.2%higher than those of CTBN/EP without n-CeO_(2)addition,respectively.

关 键 词：环氧树脂 端羧基丁腈橡胶 纳米二氧化铈 冲击强度 弯曲强度 

分 类 号：TQ[化学工程]