光电显示玻璃基板磨边工艺优化  

Optimization of Edge Grinding Method for Photoelectric Display Glass Substrate

作　　者：林海峰 付继龙 张骏 陆成州 王广彪 崔代文 LIN Haifeng;FU Jilong;ZHANG Jun;LU Chengzhou;WANG Guangbiao;CUI Daiwen(Wuhu Dongxu Photoelectric Technology Co.,Ltd.,Wuhu 241000,China)

机构地区：[1]芜湖东旭光电科技有限公司,芜湖241000

出　　处：《玻璃搪瓷与眼镜》2023年第6期30-33,共4页Glass Enamel & Ophthalmic Optics

摘　　要：生产光电玻璃基板需要对基板边部进行研磨,以消除边部裂纹、烧边、掉片等缺陷,避免下游面板厂在使用过程中出现破片。通过分析光电显示玻璃基板磨边不良产生的主要原因,优化磨边工艺,实际生产验证表明新工艺显著提高了产品边部质量,降低了边部缺陷的发生率。In the production process of photoelectric glass substrate,the edge of the glass substrate is necessary to be ground to eliminate the defects such as edge crack,burnt edge and flaking,thus avoiding fragmentation used in panel factory.The main reasons for edge defects were analyzed,then the grinding technology for photoelectric display glass substrate was optimized.It is vertified that the edge quality was improved obviously and the incidence of edge defects was reduced in actual production.

关 键 词：玻璃基板 磨边 边部质量 

分 类 号：TQ171.6[化学工程—玻璃工业]