基于层析成像的激光强度分布测量方法  

Laser intensity distribution measurement method based on tomographic imaging

作　　者：王倩[1] 蔡伟伟 陶波[2] WANG Qian;CAI Wei-wei;TAO Bo(School of Mechanical Engineering,Shanghai Jiao Tong University,Shanghai 200240,China;Northwest Institute of Nuclear Technology,Xi’an 710613,China)

机构地区：[1]上海交通大学机械与动力工程学院,上海200240 [2]西北核技术研究所,西安710613

出　　处：《中国光学（中英文）》2023年第4期743-752,共10页Chinese Optics

基　　金：国家重点实验室开放基金(No.SKLLIM1809)。

摘　　要：为了对激光光强分布进行准确测量,本文提出基于层析成像技术的激光光强分布测量方法。首先,通过数值仿真计算,对采用的成像模型的准确性以及重建算法的收敛性进行验证。对不同激光光强分布模型以及不同随机噪声等级时的重建精度进行评估。经计算,采用不同典型激光光强模型时其重建误差均小于等于7.02%;在施加10%以内随机噪声时,重建误差均小于8.5%。设计并搭建了层析成像系统,采用定制的一分七光纤束实现7七个角度信号的测量。7个角度分布在垂直于激光光束平面内的近半圆周内,各个角度距重建区域的距离约为160 mm,且7个角度的角度覆盖范围约为150°。实验通过探测激光光束穿过若丹明-乙醇溶液之后的体激光诱导荧光信号,结合后续的数据处理过程间接实现激光光强三维分布的反演。在数据处理过程中,采用交替迭代重建算法对探测信号进行吸收矫正的三维重建,可间接地获得激光光强分布。为了定量评估测量精度,在进行重建时仅采用其中6个角度,将余下一角度的重建反投影以及投影数据间的相关性用来间接证明此重建方法的可行性。计算结果表明,该角度投影以及反投影之间的相关性系数为0.9802,可间接的验证该方法的可行性。可以预见,本工作提出的激光光强三维测量方案在激光应用领域具有广泛的前景。In order to accurately measure the laser intensity distribution,we propose a method based on tomographic imaging.Firstly,numerical studies were performed to validate the correctness of the imaging model and convergence of the reconstruction algorithm.Reconstruction errors were less than or equal to 7.02%with different laser intensity distribution phantoms employed and less than 8.5%with the addition of different random noise levels under 10%.Additionally,a demonstration experiment was performed with the employment of a customized fiber bundle to realize the measurement from seven views.Seven views are distributed along a semi-circle plane which is perpendicular to the propagation direction of the laser beam.The distance from the laser beam to each view is nearly 160 mm and the angle coverage range of the seven views is about 150°.Laser-induced fluorescence obtained after the laser passed through a rhodamine-ethanol solution was collected by the tomographic imaging system.Then,the laser intensity distribution was obtained through absorption-corrected three-dimensional(3D)reconstruction.The correlation of the projection and re-projection of the one view was used to quantitatively access the accuracy after the other six views were adopted in the reconstruction.The results show the feasibility of the method with a correlation coefficient of 0.9802.It can be predicted that the 3D laser intensity measurement scheme proposed in this work has a broad prospect in the field of laser applications.

关 键 词：光学诊断 计算成像 层析成像 三维重建 激光诱导荧光 

分 类 号：TP394.1[自动化与计算机技术—计算机应用技术] TH691.9[自动化与计算机技术—计算机科学与技术]