静态干涉型高温温度场成像探测方法研究  

Imaging and detection method for static interferometric high-temperature temperature field

作　　者：张瑞[1,2] 徐承雨 王志斌[1,2,3] 唐维平 薛鹏 李孟委[2,3] ZHANG Rui;XU Cheng-yu;WANG Zhi-bin;TANG Wei-ping;XUE Peng;LI Meng-wei(Engineering and Technology Research Center of Shanxi Provincial for Optical-Electric Information and Instrument,North University of China,Taiyuan 030051,China;Academy for Advanced Interdisciplinary Research,North University of China,Taiyuan 030051,China;School of Instrument and Electronics,North University of China,Taiyuan 030051,China)

机构地区：[1]中北大学山西省光电信息与仪器工程技术研究中心,山西太原030051 [2]中北大学前沿交叉科学研究院,山西太原030051 [3]中北大学仪器与电子学院,山西太原030051

出　　处：《中国光学（中英文）》2023年第4期796-801,共6页Chinese Optics

基　　金：国家自然科学基金(No.62105302)。

摘　　要：为了实现航空航天发动机尾焰、燃烧、爆炸等高温温度场的非接触高精度测量,对静态干涉型高温温度场探测方法展开研究。首先,设计静态干涉型高温温度场探测系统,理论分析高温温度场测量原理,研究高温干涉信号强度最低点光程差与温度的关系;其次,针对常用温度范围及可见光面阵探测器的响应波段,设计静态干涉具Savart棱镜,结合一维扫描实现温度场成像;最后,设计光学系统,拟合获得干涉最弱光程差与温度的对应关系,并获得线性拟合公式,仿真验证温度场经过系统后到达面阵探测器的干涉信号图像。结果表明,该静态干涉型高温温度场探测方法可实现1000 K−3000 K温度的高精度探测,且在线性区域,温度测量分辨率为1.4 K,温度测量相对误差优于0.8%。本文研究为军民领域的高精度高温温度场成像提供参考。In order to realize the non-contact high-precision measurement of high-temperature temperature fields such as the tail flame,combustion and explosion of aerospace engines,a static interferometric high-temperature temperature field imaging and detection method is studied.Firstly,a static interference high-temperature temperature field detection system is designed.On the basis of theoretical analysis of the measurement principle of high-temperature temperature fields,the relationship between the optical path difference and the temperature at the lowest point of high-temperature interference signal intensity is studied.Secondly,according to the response band of the visible light area array detector and the common temperature range,a static interferometric Savart prism is designed,and temperature field imaging is realized by using it for one-dimensional scanning.Finally,the optical system is designed and the corresponding relationship between the minimum optical path difference of the interference and the temperature is obtained by fitting.From this,the linear fitting formula is obtained.Simulations are conducted to verify the interference signal image where the temperature field after passing through the system reaches the area detector.The static interferometric high-temperature temperature field detection method can achieve the high-precision detection of 1000 K−3000 K temperatures.In the linear region,the temperature measurement resolution is 1.4 K and the temperature measurement relative error is better than 0.8%.This research lays the foundation for high-precision high-temperature temperature field imaging in the military and civilian fields.

关 键 词：高温温度场 干涉信号 静态干涉具 温度分辨率 

分 类 号：TP394.1[自动化与计算机技术—计算机应用技术] TH691.9[自动化与计算机技术—计算机科学与技术]