机构地区:[1]内燃机可靠性国家重点实验室,山东潍坊261041 [2]潍柴动力股份有限公司,山东潍坊261041 [3]青岛理工大学机械与汽车工程学院,山东青岛266520
出 处:《表面技术》2023年第7期130-138,共9页Surface Technology
基 金:内燃机可靠性国家重点实验室开放课题(skler-202003);国家自然科学基金项目(52175173)。
摘 要:目的探究有限量供油条件下,润湿梯度表面对往复运动条件下的油膜润滑增效作用。方法首先在玻璃试样表面制备一层疏油涂层,降低工作表面润湿性。其次,利用飞秒激光将一定宽度的条状图案刻蚀到掩膜板上,通过掩膜法,利用氧等离子刻蚀技术在玻璃块疏油涂层上构造不同宽度的亲油轨道,形成了润湿梯度表面。然后使用往复运动光弹流膜厚测量仪对亲油轨道的膜厚及油池变化进行测试。试验选用低黏度的PAO4基础润滑油,限量供给0.04μL。钢球与玻璃试样表面构成点接触往复运动摩擦副模型。结果具有一定亲油轨道宽度(0.2、0.4mm)的润湿性梯度表面具有较好的集油性能。润湿性梯度表面在往复运动行程中心位置作用最为明显,在所给试验条件下膜厚最大为原始表面的3倍。钢球-钢块接触副的摩擦测试结果表明,本文提出的润湿梯度表面使摩擦因数最高下降30%。另外,由于载荷效应导致接触区外侧毛细集油作用减弱,乏油程度增加,随着载荷增加,润滑油膜减小。油滴在一定宽度亲油轨道的扩散仿真结果说明润湿性梯度表面可以有效地将润滑油限制在轨道内,有利于往复运动过程中润滑剂的回流。结论提出的润湿性梯度表面有较强的集油作用,改善往复运动弹流接触副的供油和润滑状态。Starvation can usually be found in lubrication of machine elements due to insufficient oil replenishment,and the present study is to explore the role of wettability gradient on the lubrication film building under reciprocating motion with limited oil supply.On the glass block specimens,oleophilic lubrication tracks with oleophobic side regions were prepared.Oleophobic AF(anti-fingerprint)layers were fabricated on the glass block surface.With masks by femtosecond laser,oxygen plasma etching was used to remove prescribed strip area of the oleophobic AF layer on the glass block surface in such a way that oleophilic track with different width were obtained.A custom-made optical EHL(elastohydrodynamic lubrication)test rig,which was capable of reciprocating motion with pure rolling,was used to measure the film thickness and oil pools in the present study.Lubricated point contact was formed between the steel ball and the prepared glass block surface.PAO4 base oil was employed in the test with a limited supply of 0.04μL.AFM measurement showed that there was typical nanoscale papillae structure on the AF layer,which contributed as well to the oleophobic behaviours of the low surface energy surface of the glass block.The wettability gradient was justified by the movement of a PAO4 droplet to the glass region when it was placed on the boundary of the AF region and the glass region due to the high surface energy of the original glass block.Measurements of film thickness and oil pools showed that the wettability gradient,which was created at the two sides of the oleophilic tracks,generally demonstrated better oil replenishment performance when the track width was 0.2 mm and 0.4 mm,and then the film thickness was higher.On the contrary,the film thickness with a full AF layer(the oleophilic track width was 0 mm)was even lower than that with the original glass block due to its weak affinity to the lubricant.Moreover,it was observed that the film thickness was mostly increased at the center of the stroke,and the film thickness m
关 键 词:有限量供油 往复运动 油膜厚度 自集油 润湿梯度表面 载荷效应
分 类 号:TH117.1[机械工程—机械设计及理论]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...