中俄码头设计规范关于港口平面布置对比  

Comparison of port plane layouts in design codes of China and Russia

作　　者：高鹏 赵传刚 潘柏安 GAO Peng;ZHAO Chuangang;PAN Baian(CCCC Second Harbor Consultant Co.,Ltd.,Wuhan 430060,China)

机构地区：[1]中交第二航务工程勘察设计院有限公司,湖北武汉430060

出　　处：《水运工程》2023年第7期89-94,共6页Port & Waterway Engineering

摘　　要：介绍俄罗斯港口设计规范Standards for the design of sea channels,fairways and maneuvering areas中有关港口平面布置的设计方法,通过案例计算,分析与中国《海港总体设计规范》之间的设计差异,发现中俄规范中对港口平面布置有较大的相似之处,但对于港池宽度、停泊水域宽度和航道宽度等部分有差异,对类似实际工程应用有指导意义。This paper introduces the design method of the port plane layout in the Russian port design code,namely Standards for the design of sea channels,fairways and maneuvering areas and analyzes the design differences between the Russian code and the Chinese code,namely Design Code of General Layout for Sea Ports through the case calculation.There are similarities between the two codes in terms of port plane layout,while differences in the basin width,berthing water width,and channel width remain,which is of guiding significance for similar practical engineering applications.

关 键 词：泊位长度 港池宽度 口门宽度 航道宽度 

分 类 号：U65[交通运输工程—港口、海岸及近海工程]