热轧黑卷连续平整线带钢跑偏分析  

Research on Strip Deviation and Deviation Correction System of Hot Rolling Black Coil Continuous Skin Pass Line

作　　者：李坤[1] 张子强 张艳民 张振营[1] 张令琴[1] Li Kuni;Zhang Ziqiang;Zhang Yanmin;Zhang Zhenying;Zhang Lingqin(WISDRI Engineering&Research Incorporation Ltd.,Wuhan 430223;Hebei Taihang Iron and Steel Group Co.,Ltd.,Handan 056300)

机构地区：[1]中冶南方工程技术有限公司,湖北武汉430223 [2]河北太行钢铁集团有限公司,河北邯郸056300

出　　处：《冶金设备》2023年第3期52-57,共6页Metallurgical Equipment

摘　　要：跑偏严重影响机组的产量和产品质量,甚至造成断带事故。本文根据设计图纸和力学理论,结合现场实例分析了连续生产线带钢跑偏问题产生的原因。研究表明:机械设备制造和安装精度不满足设计要求是引起带钢跑偏的主要因素;来料带钢卷形、板形不良会造成带钢跑偏;成品钢卷内外圈错边除了受设备安装精度的影响外,与穿带张力参数的设置和皮带助卷器的性能有很大的关系;焊缝前后带钢的对中精度会造成带钢过焊缝时跑偏。研究结果经现场考核证明,具有广泛借鉴意义。Deviation often occurs in the continuous production of strip steel,which seriously affects the output and product quality of the unit,and even leads to belt breaking accidents.Based on design drawings,mechanical theory and field examples,this paper analyzes the causes of strip deviation in continuous production line.The research shows that the manufacturing and installation accuracy of mechanical equipment does not meet the design requirements is the main factor causing strip steel deviation;Uneven coil shape and bad plate shape of incoming strip steel will cause strip steel deviation;The misalignment of the inner and outer rings of the finished steel coil is not only affected by the installation accuracy of the equipment,but also greatly related to the setting of the threading tension parameters and the performance of the belt winding aid;The centering accuracy of the strip steel before and after the weld will cause the strip steel to deviate when passing through the weld.The research results have been verified by the on-site examination.It has extensive reference significance.

关 键 词：带钢 连续线 跑偏 

分 类 号：TG333[金属学及工艺—金属压力加工] TG335.12