结构参数对高温超导绕组线圈磁化损耗影响分析  

Influence analysis of structural parameters of HTS windings on magnetization losses

作　　者：张玉峰[1] 王佳怡 杨舒淼 韩盼盼 杜光辉 Zhang Yufeng;Wang Jiayi;Yang Shumiao;Han Panpan;Du Guanghui(School of Electrical and Control Engineering,Xi'an University of Science and Technology,Xi'an 710054,China)

机构地区：[1]西安科技大学电气与控制工程学院,西安710054

出　　处：《低温与超导》2023年第6期35-41,68,共8页Cryogenics and Superconductivity

基　　金：国家自然科学基金(52177056)资助。

摘　　要：为了研究高温超导电力设备的绕组密度对其磁化损耗的影响,优化绕组线圈结构,减小交流损耗。利用有限元仿真软件,建立了多匝双根单饼线圈绕组的二维轴对称模型。在外加交变磁场条件下,分别改变超导绕组线圈匝数、匝间间距,分析磁化损耗的变化规律。结果表明,线圈间存在屏蔽作用,在一定范围内,超导线圈匝数越多,磁化损耗越小,匝间间距与超导线圈的磁化损耗正相关。In order to study the effect of winding density on magnetization loss of high-temperature superconducting power devices,optimize the winding coil structure and reduce the AC loss,the finite element simulation software was used and a two-dimensional axisymmetric model of multi-turn single-pancake coil with double-tape windings was established.Under the con⁃dition of applied alternating magnetic field,the number of turns and inter-turn spacing of superconducting windings were changed respectively to analyze the variation law of magnetization loss.The results show that there is a shielding effect between the coils.Within a certain range,the more turns of the coils,the smaller the magnetization loss,and the size of inter-turn spac⁃ing is positively correlated with the magnetization loss of the HTS coil.

关 键 词：高温超导线圈 参数优化 磁化损耗 线圈匝数 有限元模型 

分 类 号：TM26[一般工业技术—材料科学与工程]