基于射表数据的火炮射击诸元解算方法研究  

Research on calculation methods of gun firing data solution based on firing table data

作　　者：吴永琪 秦鹏飞[1] 孙伟 熊涛[1] 郑兴博 WU Yongqi;QIN Pengfei;SUN Wei;XIONG Tao;ZHENG Xingbo(Northwest Institute of Mechanical and Electrical Engineering,Xianyang 712099,China)

机构地区：[1]西北机电工程研究所,陕西咸阳712099

出　　处：《兵器装备工程学报》2023年第S01期187-192,共6页Journal of Ordnance Equipment Engineering

摘　　要：依据现有射表数据,采用插值方法建立出多组数据对应关系,通过火炮坐标和目标坐标计算出炮目距离和炮目方向,获得表尺改变量和方向改变量计算表尺和方向。选用某自行火炮的某型弹射表为实验数据,对基于射表数据的火炮射击诸元解算方法进行仿真验证。结果表明,基于射表数据的火炮射击诸元解算方法的解算精度和解算速度满足技术指标要求。Based on the existing data of the firing table,the corresponding relationship of multiple groups of data is established by interpolation method.The gun target distance and direction are calculated through the gun coordinates and targets coordinates,the backsight change and direction change are obtained,and then the backsight and direction are calculated.The firing table of a certain type of self-propelled gun is selected as the experimental data,and the calculation method of gun firing data based on the firing table data is simulated and verified.The simulation results show that the accuracy and speed of the method based on the firing table data meet the technical requirements.

关 键 词：自行火炮 射击诸元解算 射表数据 插值方法 数据对应关系 

分 类 号：TJ301[兵器科学与技术—火炮、自动武器与弹药工程]