检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:王乾宇 吴飞鹏[1] 孙秋分 戴传瑞 刘静[1] WANG Qianyu;WU Feipeng;SUN Qiufen;DAI Chuanrui;LIU Jing(School of Petroleum Engineering,China University of Petroleum,Qingdao 266580,China;Hangzhou Institute of Geology,Petrochina,Hangzhou 310023,China)
机构地区:[1]中国石油大学(华东)石油工程学院,山东青岛266580 [2]中国石油杭州地质研究院,浙江杭州310023
出 处:《断块油气田》2023年第4期559-565,578,共8页Fault-Block Oil & Gas Field
基 金:国家重点研发计划项目“甲烷原位燃爆压裂储层适应性及优化设计和评价技术”(2022YFA0711800)。
摘 要:合理的页岩气产能预测方法是动态储量评估和提高开发效益的关键。基于常用的6种产量递减方法,结合页岩气流动状态划分和某区块页岩气井实际生产数据,建立了页岩气井后期生产数据获取方法及产能预测方法优选规律。研究结果表明:对进入拟稳态阶段的生产井,前期流动状态参数对后期产能预测影响较大;前期流动状态参数在-0.40~-0.04时,产能预测选用改进延伸指数递减法或改进Duong递减法;前期流动状态参数在-0.50~-0.40时,产能预测选用双曲递减法或改进延伸指数递减法。对未进入拟稳态阶段的生产井,前期流动状态参数在-0.40~-0.04时,选用0.5×改进Duong递减法+0.5×改进延伸指数递减法获取后期生产数据;前期流动状态参数在-0.50~-0.40时,选用0.5×改进延伸指数递减法+0.5×双曲递减法获取后期生产数据;基于获取的后期生产数据,利用优选方法进行产能预测。选取实际生产数据,对进入拟稳态阶段的生产井进行分析,预测产量的误差平均为4.51%,证明了产能预测方法优选规律的可靠性。Reasonable prediction methods for shale gas productivity is the key to evaluate dynamic reserve and enhance development benefit.Based on six common production decline methods,the method of late shale gas data acquisition and optimization rule of productivity prediction method are established in combination with flow state division of shale gas and actual production data from shale gas wells in a block.The results show that:for the production wells entering the quasi-steady state stage,the early flow state has great influence on the late productivity prediction.When the early flow state parameters range from-0.40 to-0.04,the modified SEPD(YM-SEPD)method or improved Duong declining method is chosen to predict productivity;when the early flow state parameters range from-0.50 to-0.40,hyperbolic decline method or YM-SEPD method are chosen to predict productivity.For the production wells not entering the quasi-steady state stage,when the early flow state parameters range from-0.40 to-0.04,0.5×improved Duong declining method+0.5×YM-SEPD method are chosen to get the late production data;when the early flow state parameters range from-0.50 to-0.40,0.5×hyperbolic decline method+0.5×YM-SEPD method are chosen to get the late production data.Based on the acquired late data,the productivity prediction is carried out through the optimization methods.The actual production data was selected to analysize evaluation case of well entering the pseudo-steady state stage,with an average error of 4.51%in productivity prediction,which proves the reliability of optimization rule of productivity prediction method.
关 键 词:页岩气 产能预测 产量递减法 流动状态 适用性评价
分 类 号:TE155[石油与天然气工程—油气勘探]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.26