残余应力对Super304H焊缝金属再热裂纹敏感性的影响  

Effect of Residual Stress on Reheat Cracking Susceptibility of Super304H Austenitic Stainless Steel Weld Metal

作　　者：肖孝鹏 董文超[1] 李殿中[1] 李依依 陆善平[1] Xiao Xiaopeng;Dong Wenchao;Li Dianzhong;Li Yiyi;Lu Shanping(Shenyang National Laboratory for Materials Science,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China;School of Materials Science and Engineering,University of Science and Technology of China,Shenyang 110016,China;Key Laboratory of Nuclear Materials and Safety Assessment,Institute of Metal Research,Chinese Academy of Sciences,Shenyang 110016,China)

机构地区：[1]中国科学院金属研究所沈阳材料科学国家研究中心,辽宁沈阳110016 [2]中国科学技术大学材料科学与工程学院,辽宁沈阳110016 [3]中国科学院金属研究所核用材料与安全评价重点实验室,辽宁沈阳110016

出　　处：《稀有金属材料与工程》2023年第6期2093-2102,共10页Rare Metal Materials and Engineering

基　　金：沈阳材料科学国家实验室创新项目(L2019R35)。

摘　　要：采用预压缩CT试样的方法研究了残余应力对Super304H奥氏体不锈钢焊缝金属再热裂纹敏感性的影响。通过ABAQUS模拟结合EBSD表征分析了不同残余应力下的焊缝金属的塑性应变分布和位错密度分布,并从残余应力诱导焊缝金属晶内析出相的方面解释了残余应力对焊缝金属再热裂纹敏感性的影响。结果表明:高预压缩载荷的CT试样具有更高的残余应力,更容易产生再热裂纹。随着残余应力的增加,焊缝金属拉伸试样的抗拉强度逐渐降低。焊缝金属CT试样靠近U型口的高残余应力区域具有更高的位错密度和更高比例的亚晶,促进了晶内小颗粒相的析出,使得晶内硬化更为严重,再热裂纹更容易产生。The effect of residual stress on the reheat cracking susceptibility of Super304H austenitic stainless steel weld metal by the pre-compressed CT specimen method was studied.The plastic strain and dislocation density distribution of weld metal under different residual stresses were analyzed by ABAQUS simulation combined with EBSD characterization.The effect of residual stress on the reheat cracking susceptibility was explained from the aspect of stress-induced precipitation.The results show that CT specimens with high pre-compression force have higher residual stress and are more likely to generate cracks.With increasing the residual stress,the tensile strength of the specimen is decreased gradually.The high residual stress region of the CT specimen closed to the U-shaped notch has higher dislocation density and subgrain,promoting the precipitation of the small intragranular phase,which makes the intragranular hardening more serious and the easy occurrence of reheat cracks.

关 键 词：再热裂纹 残余应力 奥氏体不锈钢 焊缝金属 位错密度 

分 类 号：TG142.71[一般工业技术—材料科学与工程]