多色网点结构提花织物设计与色彩仿真评价  

Design and color simulation evaluation of multi-color dot structured jacquard fabrics

作　　者：张爱丹[1,2] 郭珍妮 叶婧婧 ZHANG Aidan;GUO Zhenni;YE Jingjing(College of Textile Science and Engineering(International Institute of Silk),Zhejiang Sci-Tech University,Hangzhou,Zhejiang 310018,China;Key Laboratory of Intelligent Textile and Flexible Interconnection of Zhejiang Province,Hangzhou,Zhejiang 310018,China)

机构地区：[1]浙江理工大学纺织科学与工程学院(国际丝绸学院),浙江杭州310018 [2]浙江省智能织物与柔性互联重点实验室,浙江杭州310018

出　　处：《纺织学报》2023年第7期57-63,共7页Journal of Textile Research

基　　金：中国纺织工业联合会应用基础研究项目(J201802)。

摘　　要：为丰富和改善全彩型提花织物的色彩仿真效果,提出一种由多色网点叠加组合表现的彩色仿真提花织物设计模式。通过对全彩数码图像的原色分离产生多幅分色图,并将其逐一转化为二色值网点图,再重新组合成1幅8色以内的网点图像,结合重纬结构进行提花织物样品设计与织造。对织物样品进行多个测色点的颜色数据采集,并将其与原始数码图像进行色差比较分析。结果表明:相较于一般4色纬影光组织织物样品,多色网点结构提花织物的总色差均值降低了14.21%;进一步按明度值、红绿值和黄蓝值进行分项色差比较发现,多色网点结构提花织物的绿、红、蓝和黄等色值的色差均值分别降低了27.31%、19.72%、13.24%和9.65%,而明度差均值降低了12.88%,证明多色网点结构设计模式的可行性及其更理想的色彩仿真性能。Objective Shaded weaves are extensively used in the design of figured full-color simulation of jacquard fabrics,to the extent that this design pattern is solidified into a certain mind-set.In order to overcome this situation,a design method of multi-color dot superposition combination is proposed for motivating the diversified development of the design technology for color simulation jacquard fabrics.Method The digital screen technology was adopted to discretize the digital color image with continuous tone into a multi-color dot image,which directly became the weave structure of a jacquard fabric.The multi-color dot image was composed of no more than 6 to 8 fixed colors(Fig.1(b)).In order to investigate the color simulation performance of jacquard fabrics based on multi-color dot image,six jacquard fabric samples were woven by using two design method respectively for representing three different pictures(Fig.3).Three color measurement point templates were designed for collecting the color data of the jacquard fabric samples(Fig.4).The templates were fixed on the jacquard fabrics,and then the Lab values of each color measurement point were measured by using the American X-rite Color i7 desktop spectrophotometer.By comparative analyzing the color difference between the images of jacquard fabric samples and the original images,the color simulation performances of the jacquard fabric applying the multi-color dot image were demonstrated.Results The average total color differences(ΔE_(ab))among the six jacquard fabric samples and the corresponding original image were calculated(Tab.2).The data of three multi-color dot structure jacquard fabrics was 14.31,24.09 and 16.10,representing improved color simulation performance of 13.11%,19.49%and 4.28%over that of shaded weave jacquard fabric images,respectively.In addition to comparing the total color difference of single jacquard fabrics,the measured color data of six jacquard fabrics were classified into two groups according to the two different design method of multi-col

关 键 词：多色网点 提花织物 色彩仿真 设计模式 色差 仿真评价 

分 类 号：TS145.1[轻工技术与工程—纺织材料与纺织品设计] TS105.1[轻工技术与工程—纺织科学与工程]