复合材料编织-缠绕-拉挤系统建模及其控制策略  

Modeling and control strategy of composite braidingwinding-pultrusion system

作　　者：杨金 李麒阳 季霞 孙以泽[1] YANG Jin;LI Qiyang;JI Xia;SUN Yize(College of Mechanical Engineering,Donghua University,Shanghai 201620,China)

机构地区：[1]东华大学机械工程学院,上海201620

出　　处：《纺织学报》2023年第7期199-206,共8页Journal of Textile Research

基　　金：国家发改委重大技术装备攻关项目(2102-320905-89-05-514710)。

摘　　要：为解决纤维增强复合材料型材、管件类生产过程中编织机多电动机负载不均,以及编织转速、缠绕转速和牵引速度难以协同工作等问题,提出基于模型预测控制的动态均载控制方法,应用于编织机电动机组,建立编织-缠绕-拉挤一体化数学模型,采用比例协同偏差耦合控制策略保证编织-缠绕-拉挤系统的协同工作精度,并对其进行Simulink仿真与现场实验。实验结果表明:动态均载控制能使编织机电动机组在满足转速的前提下,输出转矩偏差控制在0.2 N·m以内;比例协同偏差耦合控制策略使互相独立的编织机、缠绕机和牵引装置在0.08 s内达到协同要求,提高了编织角的稳定性和复合材料制品的综合性能。Objective The load uniformity of braiding machine motor and the co-control of braiding,winding and pultrusion system seriously affect the stability of production systems,thus affecting the mechanical properties of formed parts.Therefore,in order to ensure the load uniformity of the motor and the system cooperative control among the weaving machine,the winding machine and the traction device is crucial to control the quality of the molding parts.Method The dynamic uniform load control method based on the model predictive control(MPC)is proposed and applied to the braiding electromechanical unit,and the integrated mathematical model of the braiding-windingpultrusion production system is established.The proportional synergistic deviation coupling control strategy is adopted to improve the collaborative working accuracy of the production system.The simulation and experiments were carried out to verify the proposed modeling and control strategy.Results It was showed that the braiding machine motor speed can reach the stable state within 0.05 s under both two control strategies.The fluctuation of the motor speed under the dynamic uniform load control condition is within 2%,while the fluctuation of the motor speed under the parallel control condition is within 1%.Braiding machine motor torque showed that the output torque reaches the stable state within 0.05 s.For the same time,the maximum deviation of the output torque under the parallel control model is nearly 1 N·m,while the maximum deviation of the output torque of the dynamic uniform load control is about 0.2 N·m.Simulation results before model coupling shows the duration to the stable state for the braiding machine,winding machine and traction device.Since the three devices are independent of each other and have no direct physical connection,the times to steady state of these three devices are different.The motor speed of the braiding machine and the winding machine can be stabilized within 0.03 s,while the motor of the traction unit can be stabilized at about 0

关 键 词：复合材料 拉挤成型 环形编织机 动态均载控制 比例协同偏差耦合 

分 类 号：TM351[电气工程—电机]