基于AutoCAD二次开发的转子轮槽半精铣刀波刃型线参数化绘制方法研究  

Research on Parametric Drawing Method of Rotor Groove Semi-finishing Cutter Wave Edge Profile Based on AutoCAD Secondary Development

作　　者：周伶俐 Zhou Lingli(Department of Electrical Information Engineering,Sichuan Engineering Technical College,Deyang 618000,China)

机构地区：[1]四川工程职业技术学院电气信息工程系,四川德阳618000

出　　处：《兵工自动化》2023年第8期10-14,共5页Ordnance Industry Automation

摘　　要：为提高汽轮机转子轮槽半精铣刀在AutoCAD软件中绘制效率,对手工绘制方法进行分析。应用AutoLisp软件设计出转子轮槽半精铣刀波刃型线铣刀基于AutoCAD的参数化绘图软件。结果表明:刀具设计人员加载软件后仅需输入齿数、波长、波深3个参数便可自动完成刀具型线的绘制,能大大缩短刀具设计和技术准备时间。In order to improve the drawing efficiency of semi-finishing milling cutter for turbine rotor groove in AutoCAD software,the manual drawing method is analyzed.A parametric drawing software based on AutoCAD is designed by using AutoLisp software to design the wave edge profile milling cutter of rotor groove semi-finishing milling cutter.The results show that after loading the software,the cutter designer only needs to input three parameters,such as tooth number,wavelength and wave depth to automatically complete the drawing of cutter profile,which greatly shortens the time of cutter design and technical preparation.

关 键 词：转子轮槽半精铣刀 AutoLisp软件 参数化绘图 

分 类 号：TP391.72[自动化与计算机技术—计算机应用技术]