长轴类零件的自动对接系统设计  

Design of Automatic Docking System for Long Axis Parts

作　　者：刘尧峰 LIU Yaofeng

机构地区：[1]成都天奥测控技术有限公司,四川成都611731

出　　处：《今日自动化》2023年第4期106-108,共3页Automation Today

摘　　要：在工程中有许多需要筒类零件对接装配的场合,如导弹舱段对接、连接器的对接装配等,这类对接装配的特点是对接行程较短。国内的研究院和企业对此类对接进行了很多研究,但在长轴零件与深孔零件的对接装配方面,国内几乎无相关介绍。文章根据工程实际应用,设计出一种针对长轴与深孔零件的自动对接系统,经过多次验证测试,效果良好。该研究成果对长轴、重型零件的对接装配具有重要的参考价值。There are many occasions in engineering that require the docking assembly of cylindrical parts,such as missile cabin docking,connector docking assembly,etc.The characteristic of this type of docking assembly is the short docking travel.Domestic research institutes and enterprises have conducted many studies on this type of docking,but there is almost no relevant introduction in China regarding the docking assembly of long axis parts and deep hole parts.This article designs an automatic docking system for long axis and deep hole parts based on practical engineering applications.After multiple validation tests,the results are good.This research achievement has important reference value in the docking assembly of long axis and heavy parts.

关 键 词：长轴类零件 对接 系统设计 

分 类 号：TH45[机械工程—机械制造及自动化]