基于综合性能指标优化转子啮合线的研究  

RESEARCH ON OPTIMIZATION OF ROTOR MESHING LINE BASED ON COMPREHENSIVE PERFORMANCE INDEX

作　　者：胡蓉 何雪明 于嘉川 HU Rong;HE XueMing;YU JiaChuan(School of Mechanical Engineering,Jiangnan University,Wuxi 214122,China;Jiangsu Key Laboratory of Advanced Food Manufacturing Equipment and Technology,Wuxi 214122,China)

机构地区：[1]江南大学机械工程学院,无锡214122 [2]江苏省食品先进制造装备技术重点实验室,无锡214122

出　　处：《机械强度》2023年第4期1011-1016,共6页Journal of Mechanical Strength

基　　金：国家自然科学基金项目(51275210、51975251);江苏省食品先进制造装备技术重点实验室自主研究课题项目(FMZ2018Y2)资助。

摘　　要：进行双螺杆压缩机型线优化设计时,考虑到各几何特性参数对压缩机性能的影响有所不同。为了更加直观地判断所设计型线的优劣,提出了一种综合性能指标来判断转子型线的优劣,并将基于该综合性能指标设计出型线更优的转子进行流体仿真和实验验证。与原始型线相比,优化型线的接触线长度略有增加;泄漏三角形区域面积有所减小;面积利用系数有所增大;但反映整体性能指标的综合的单一性能指标指向更佳,也初步证实了提出方法的正确性。In the optimization design of twin-screw compressor line,the influence of geometric parameters on compressor performance is considered to be different.In order to judge the advantages and disadvantages of the designed profile more directly,proposed a comprehensive performance index to judge the advantages and disadvantages of the rotor profile,and designed a rotor with better profile based on the comprehensive performance index for fluid simulation and experimental verification.Compared with the original profile,the length of the contact line of the optimized profile increases slightly,the area of leakage triangle decreases,area utilization coefficient increased.But the single performance index which reflects the whole performance index is better,which also preliminarily proves the correctness of the proposed method.

关 键 词：综合性能 螺杆转子 啮合线 优化设计 

分 类 号：TH455[机械工程—机械制造及自动化]