TA15金属粉末注射成形技术的研究  

Research on TA15 Metal Powder Injection Molding Technology

作　　者：吴海荣 魏敬浩 李庆棠 陈刚[2] 刘宝昌 WU Hai-rong;WEI Jing-hao;LI Qing-tang;CHEN Gang;LIU Bao-chang(Beijing Xinfeng Aerospace Equipment Co.,Ltd,Beijing 100854,China;University of Science and Technology Beijing,Beijing 100083,China)

机构地区：[1]北京新风航天装备有限公司,北京100854 [2]北京科技大学,北京100083

出　　处：《世界有色金属》2023年第11期121-123,共3页World Nonferrous Metals

摘　　要：金属粉末注射成形是一种成熟的近净成形技术,在批量生产中该技术具有高效低成本的生产特点。本文以金属粉末注射成形所得的TA15高温钛合金样品为研究对象,研究了可以用于稳定生产的TA15钛合金粉末注射成形工艺。研究表明,本文所用工艺制得样品的致密度为98.6%,样品的组织形貌具有典型的魏氏体特征,元素分布均匀,室温下抗拉强度为1077 MPa,屈服强度为1020 MPa,延伸率为7.5%,具有良好的韧性,可以满足生产航天航空承力结构件的静力学技术指标。Metal powder injection molding is a mature near net forming technology that has the characteristics of high efficiency and low cost in mass production.This article focuses on the TA15 high-temperature titanium alloy samples obtained by metal powder injection molding,and studies the TA15 titanium alloy powder injection molding process that can be used for stable production.The research shows that the density of the sample prepared by the process used in this paper is 98.6%,the microstructure of the sample has typical Widmanstatten characteristics,the element distribution is uniform,the tensile strength at room temperature is 1077 MPa,the yield strength is 1020 MPa,and the elongation is 7.5%,which has good toughness,and can meet the Statics technical indicators of the production of aerospace load-bearing structural parts.

关 键 词：TA15高温钛合金 微观组织 力学性能 

分 类 号：TF124[冶金工程—粉末冶金]