检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张岩 马圣敏 张建清 刘林鳢 ZHANG Yan;MA Sheng-min;ZHANG Jian-qing;LIU Lin-li(Dadu River Shuangjiangkou Hydropower Project Development Co.,Ltd.,Maerkang 513229,China;Changjiang Geophsical Exploration&Testing Co.,Ltd.,Wuhan 430000,China)
机构地区:[1]四川大渡河双江口水电开发有限公司,四川马尔康513229 [2]长江地球物理探测(武汉)有限公司,武汉430000
出 处:《长江科学院院报》2023年第8期139-144,151,共7页Journal of Changjiang River Scientific Research Institute
摘 要:附加质量法是应用于大坝堆石体碾压质量的重要检测方法,其现场测试参数设置是否合理,直接影响附加质量法检测数据的质量。为了获取现场测试参数,在双江口水电站大坝堆石料区选取了质量块直径、炮检距、震源高度等测试参数进行现场试验研究,通过对附加质量法数据采集、处理与分析全过程中间成果进行分析评价,确定了质量块直径为50 cm、震源高度为35 cm、炮检距为25 cm的现场测试参数,形成了一套测试参数的现场确定方法。The additive mass method is a crucial detection technique for assessing the rolling quality of rock-fill of dams.The quality of additive mass method’s detection data is directly dependent on the reasonableness of its field test parameters.To determine the optimal test parameters,field tests were conducted in the rock-fill area of the dam of Shuangjiangkou hydropower station.Test parameters,including mass block diameter,offset,and source height,were selected for the field test.Through the analysis and evaluation of the additive mass method data and intermediate results in the data acquisition process,the field optimal test parameters were determined to be a mass block diameter of 50 cm,a source height of 35 cm,and an offset of 25 cm.Consequently,a comprehensive set of field determination method for the test parameters was established.
关 键 词:大坝堆石料 附加质量法 测试参数 现场试验 双江口水电站
分 类 号:TV522[水利工程—水利水电工程]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.129.73.179