Fundamental research on recovering metals from hot-dip Zn-Al-Mg dross by supergravity separation  

作　　者：Ren-sheng Chu Zhe Wang Xiao-xuan Deng Ning-jie Sun Cheng-liang Xu Zhan-cheng Guo 

机构地区：[1]State Key Laboratory of Advanced Metallurgy,University of Science and Technology Beijing,Beijing 100083,China [2]Research Institute of Technology,Shougang Group Co.,Ltd.,Beijing 100043,China

出　　处：《Journal of Iron and Steel Research International》2023年第7期1324-1333,共10页

基　　金：supported by the National Natural Science Foundation of China(Grant No.52174275).

摘　　要：The dross generated in the hot-dip Zn–Al–Mg coating process is a valuable co-product,since it contains high quantities of recyclable alloy.A new method to recover Zn–Al–Mg alloy from the industrial Zn–Al–Mg dross was proposed using supergravity separation.The separation efficiency was analyzed as a function of gravity coefficient(G),separation time,and separation temperature.The separation of Zn–Al–Mg alloy from the dross can be achieved at G>100.The alloy content in the dross decreased gradually with an increase in the gravity coefficient,the separation time,and the separation temperature.The alloy ratio in the enriched dross decreased almost linearly as the gravity coefficient increased,and the recovery of Zn–Al–Mg alloy from the dross exceeded 78%;these results were consistent with the results of the FactSage software calculation.The purified alloy can be in-situ used in the hot-dip Zn–Al–Mg bath for production.The feasibility of supergravity separation as a promising process for efficiently recovering Zn–Al–Mg alloy from Zn–Al–Mg dross was thus demonstrated.

关 键 词：Zn–Al–Mg alloy SUPERGRAVITY Recovery Hot-dip dross SEPARATION 

分 类 号：TG14[一般工业技术—材料科学与工程]