Mechanical properties and durability of alkali-activated steel slag-blastfurnace slag cement  

作　　者：Jing-xiong Zhong Li-ying Cao Mei Li Shu-ping Wang Fang Liu Xue-wei Lv Xiao-qin Peng 

机构地区：[1]College of Materials Science and Engineering,Chongqing University,Chongqing 400045,China [2]Shanghai Baosteel New Building Materials Technology Co.,Ltd.,Shanghai 200940,China [3]Zhoushan Putuo District Housing and Urban Rural Development Bureau,Zhoushan 316199,Zhejiang,China

出　　处：《Journal of Iron and Steel Research International》2023年第7期1342-1355,共14页

基　　金：supported by the Natural Science Foundation Project of Chongqing(cstc2020jcyj-msxmX0954);the Chongqing Outstanding Youth Project(cstc2019JCYJQX0024);the National Natural Science Foundation of China(52204415.U1902217)。

摘　　要：Alkali-activated cement(AAC)is either clinker-less or free,and it is also environmentally friendly due to its low carbon footprint and wide range sources.Industrial wastes,like steel slag and blastfurnace slag,usually have latent hydraulic reactivity,and can be used as precursors of AAC.Both clinkerless and clinker-free AAC were prepared from the mixture of steel slag and blastfurnace slag by using water glass as an activator,and four different recipes which satisfied the strength requirement of 42.5R Portland cement were obtained.Each recipe of AAC exhibited better resistance to sulfate attack and frost attack than Portland cement.AAC showed huge drying shrinkage,but it was equivalent to that of Portland cement as steel slag content increased to 40%.The AAC also had quite low risk of alkali-aggregate reaction.Microstructure analysis showed that the major products were calcium silicate hydrate(C–S–H),calcium aluminosilicate hydrate(C–A–S–H)and zeolite-like phases.Ettringite was also detected in the binder when gypsum was contained in the precursors.

关 键 词：Alkali-activated cement Steel slag Blastfurnace slag DURABILITY Mechanical property 

分 类 号：TQ172[化学工程—水泥工业]