电磁线圈发射器环氧材料高温老化特性研究  

Study on high temperature aging characteristics ofepoxy material for electromagnetic coil launcher

作　　者：张亚东[1] 李凯翔 祝明智 万辉龙 ZHANG Yadong;LI Kaixiang;ZHU Mingzhi;WAN Huilong(School of Electrical Engineering and Automation,Wuhan Univ.,Wuhan 430072,China;State Grid Nanchang Power Supply Company,Nanchang 330006,China)

机构地区：[1]武汉大学电气与自动化学院,武汉430072 [2]国网江西省电力公司南昌供电公司,南昌330006

出　　处：《海军工程大学学报》2023年第4期13-19,共7页Journal of Naval University of Engineering

基　　金：国家自然科学基金资助项目(52177155);中央高校基本科研业务费专项资金资助项目(2042022gf0001)。

摘　　要：因工作在脉冲大电流、高温、大冲击力等极端条件下,电磁线圈发射器容易老化失效,甚至发生结构损坏。为此,对电磁发射器3240玻纤/环氧复合材料在高温下的老化特性进行了研究。将试样放置于110、130、150℃恒温箱中进行热老化处理,并对热老化试样进行了质量损失、抗冲击强度与弹性模量测试。结果表明:老化时间和温度的增加,均会使试样质量损失率增大,抗冲击强度和弹性模量减小。通过扫描电镜以及红外光谱分析可知:在高温环境下,环氧树脂的氧化分解导致其分子链断裂,破坏了其原有的分子空间结构,使其表面出现裂纹等缺陷。上述研究结果可以为电磁发射器温度老化研究提供参考。Working under the extreme conditions of pulsed high current,high temperature and large impact force is usually the main reason for the aging failure of the electromagnetic coil launcher and even structural damage.The aging characteristics of electromagnetic launcher 3240 glass fiber/epoxy composites at high temperature were studied.The specimens were placed in an incubator at 110,130,150℃for heat aging treatment whereby the mass loss,impact strength and elastic modulus tests of heat aging specimens were carried out.The results show that the increase of aging time and temperature would increase the mass loss rate of the specimens while reducing the impact strength and elastic modulus.Through scanning electron microscopy and infrared spectroscopy analysis,it can be seen that in a high temperature environment,the oxidative decomposition of epoxy resin leads to the rupture of its molecular chain,destroys its original molecular spatial structure,and causes cracks and other defects on its surface.The research results can provide a reference for the study of temperature aging of electromagnetic launcher.

关 键 词：电磁线圈发射器 环氧树脂 热老化 抗冲击强度 

分 类 号：TM215[一般工业技术—材料科学与工程]