基于有限元的大型储罐不同形状中间隔板对比分析  

STRUCTURAL ANALYSIS OF THE PARTITION PLATE FOR LARGE STORAGE TANKS BASED ON FINITE ELEMENT METHOD

作　　者：张才华 Zhang Caihua(SINOPEC Engineering Incorporation,Beijing,100101)

机构地区：[1]中国石化工程建设有限公司,北京100101

出　　处：《石油化工设备技术》2023年第5期1-6,23,I0001,共8页Petrochemical Equipment Technology

摘　　要：对某大直径储罐的中间隔板采用ANSYS软件进行了应力分析,对比了S形双曲面隔板和平面隔板的应力和变形情况,分析结果表明,平面隔板设置加强肋是一种更加合理的设计方案。与S形双曲面隔板结构相比,平面隔板变形时罐壁应力水平更小,同时,辅助支撑梁可以限制平面隔板的变形,进而降低隔板应力,提高承载能力,使结构更加优化。In this paper,stress analysis of the inner partition plate of large-diameter storage tank in a project was carried out by ANSYS.The stress and deformation of the S-shaped and flat partition plate were compared.The analysis results indicate that the flat partition plate with reinforcing bar is more reasonable.Compared with the S-shaped structure,the stress level of the tank wall under the deformation of the inner flat plate is smaller.Meanwhile,the existence of supporting can limit the deformation of the flat plate,thus reducing the stress of the partition plate and improving the bearing capacity,which may optimize the structure.

关 键 词：立式圆筒形储罐 隔板 加强肋 液柱静压力 有限元分析 强度设计 

分 类 号：TE972[石油与天然气工程—石油机械设备] TB115[理学—数学]