基于振动信号功率谱能量的钛合金铣削过程刀具磨损监测研究  

Tool wear monitoring for the titanium alloy milling process based on power spectrum energy of spindle vibration

作　　者：史靠军 胡维鑫 贾保国 田辉 白乐乐 张俊[2] SHI Kaojun;HU Weixin;JIA Baoguo;TIAN Hui;BAI Lele;ZHANG Jun(AVIC Xi’an Aircraft Industry Group Company Ltd.,Xi’an 710089,CHN;State Key Laboratory for Manufacturing Systems Engineering,Xi’an Jiaotong University,Xi’an 710049,CHN)

机构地区：[1]中航西安飞机工业集团股份有限公司,陕西西安710089 [2]西安交通大学机械制造系统工程国家重点实验室,陕西西安710049

出　　处：《制造技术与机床》2023年第9期66-73,共8页Manufacturing Technology & Machine Tool

基　　金：陕西省科技重大专项“面向航空航天精密零件加工的智能生产系统”(2019zdzx01-01-02)。

摘　　要：针对复杂切削工况下钛合金结构件加工过程中刀具磨损监测的难题,提出基于主轴振动信号功率谱能量的刀具磨损监测方法。首先,在剔除振动信号原始数据异常点的基础上,通过功率谱分布提取反映刀具磨损退化过程的0~7f_(0)频带能量指标、过齿频率基频f_(0)和倍频3f_(0)幅值等3个指标作为监测刀具退化过程的敏感指标。其次,提出基于结构件加工质量约束的刀具磨损失效阈值确定方法。最后,在钛合金槽腔结构件上验证了本方法的可行性。结果表明:相比于基于FFT谱、时域统计指标与小波包频带能量的刀具磨损监测方法,文章提出的复杂切削工况下的刀具磨损监测方法效果更加显著,可准确识别刀具的早期磨损。To solve the problem of tool wear monitoring in the machining process of titanium alloy structural parts under complex operational conditions,a novel tool wear monitoring method based on the power spectrum energy of spindle vibration was proposed.Firstly,the energy indicators of the 0~7f_(0) frequency band reflecting the tool wear degradation process,as well as the tooth passing frequency f_(0) and the frequency multiplier 3f_(0) amplitude indicators are extracted through power spectrum analysis as sensitive information for monitoring the tool degradation process.Secondly,a method is proposed to determine the tool wear fault threshold based on the machining quality constraints of structural parts.Finally,the feasibility of this method is verified on the cavity structure.The results show that compared with the tool wear monitoring methods based on FFT spectrum,time-domain statistical,and wavelet packet frequency band energy,the proposed tool wear monitoring method is more effective and can accurately identify the early tool wear.

关 键 词：刀具磨损监测 频谱能量 监测阈值 功率谱 

分 类 号：TB535[理学—物理]