煤矿井下钻孔姿态自动调节技术研究  

Research on Automatic Adjustment Technology of Drilling Attitude in Underground Coal Mine

作　　者：唐敏 Tang Min(Chongqing Research Institute,China Coal Technology and Engineering Group,Chongqing 400039,China;State Key Laboratory of Gas Disaster Detecting,Preventing and Emergency Controlling,Chongqing 400037,China)

机构地区：[1]中煤科工集团重庆研究院有限公司,重庆400039 [2]瓦斯灾害监控与应急技术国家重点实验室,重庆400037

出　　处：《煤矿机械》2023年第9期48-51,共4页Coal Mine Machinery

基　　金：重庆市英才计划项目(cstc2021ycjh-bgzxm0258);中煤科工集团重庆研究院有限公司自立重点研发项目(2022ZDXM13);天地科技股份有限公司科技创新创业资金专项面上项目(2022-2-TD-MS007)。

摘　　要：钻机在钻进、锚固及开孔定位时,需要调节机架的方位角、倾角和高度,为此设计了多方位钻孔姿态调节机构,该机构可以自动改变机架的偏转角度和提升高度。为了测定机架的偏转角度,在机架导轨尾部设置有机载姿态仪;为检测机架的提升高度,在姿态调节机构之上集成有位移传感器。采用姿态调节机构与机载姿态仪的组合,可全面实现钻孔姿态参数的调节与测量。为分析极端条件下姿态调节机构的受力状况,选取3种典型工况,对其进行了有限元分析,结果表明,姿态调节机构设计合理,强度和刚度满足需求。When the drilling rig is drilling,anchoring and opening positioning,it′s necessary to adjust the azimuth angle,dip angle and lifting height.Therefore,a multi directional drilling attitude adjustment mechanism was designed,which can change the deflection angle and lifting height of the frame automatically.In order to measure the deflection angle of the frame,an mounted attitude instrument was set at the tail of the frame guide rail.In order to detect the lifting height of the frame,a displacement sensor was integrated on the attitude adjustment mechanism.The combination of attitude adjustment mechanism and mounted attitude instrument can realize the adjustment and measurement of borehole attitude parametersfully.In order to analyze the stress state of the attitude adjustment mechanism under extreme conditions,three typical working conditions were selected and the finite element analysis were carried out.The results show that the design of the attitude adjustment mechanism is reasonable and the strength and stiffness meet the requirements.

关 键 词：姿态调节 多方位 机载姿态仪 有限元分析 

分 类 号：TD41[矿业工程—矿山机电]