长丝包覆复合包芯纱拉伸性能建模研究  

Tensile property modelling of composite core/sheath yarn with double filaments

作　　者：张华 刘帅 杨瑞华[2] ZHANG Hua;LIU Shuai;YANG Ruihua(Institute of Quartermaster Engineering&Technology,Institute of Engineering,Academy of Military Science,Beijing 100088,China;Key Laboratory of Eco-Textiles(Jiangnan University),Ministry of Education,Wuxi,Jiangsu 214122,China)

机构地区：[1]军事科学院系统工程研究院军需工程技术研究所,北京100088 [2]生态纺织教育部重点实验室(江南大学),江苏无锡214122

出　　处：《纺织学报》2023年第8期57-62,共6页Journal of Textile Research

基　　金：国家自然科学基金面上项目(52273034);江苏省自然科学基金面上项目(BK20181350)。

摘　　要：为分析和预测长丝包覆复合包芯纱的拉伸应力-应变关系,对其拉伸性能进行测试,分析拉伸曲线的不同阶段,建立由Kelvin元件、Maxwell元件和线性弹簧并联组成的五元件非线性黏弹模型,对复合纱拉伸过程进行模拟和计算,构建多项式模型对其应力-应变曲线进行拟合。结果表明:长丝包覆复合包芯纱线拉伸断裂曲线由3个阶段组成,分别是小应变线性阶段、大应变阶段和强力波动阶段;五元件非线性黏弹拉伸模型可较好解释复合纱拉伸曲线3个阶段的应力-应变特征,理论计算数据与实验结果相符,二者相关系数大于0.999,可用于预测双长丝包芯包覆复合纱的拉伸断裂性能。Objective In order to analyze and predict the tensile stress-stain relationship of core/sheath composite yarn with double filaments,a viscoelastic tensile model needs to be developed,which would enable numerical prediction of tensile strength of this composite yarn.Method The yarn was regarded as a viscoelastic body and its tensile property was shown in the form of the stress-strain corresponding to time.The models commonly used for the research of the tensile fracture mechanism of yarn are varied,such as linear spring,nonlinear spring,nonlinear dashpot,and Maxwell and Kelvin models.Some models above are selected in series or parallel configuration to establish suitable tensile model for core/sheath composite yarn with double filament.Additionally,experimental tests are conducted to verify the correctness of the viscoelastic model.Results In this study,a nonlinear viscoelastic model was established to predict the tensile stress-strain relationship of core/sheath composite yarn with double filaments.The tensile properties of the yarn were tested,and different stages of the tensile curve were analyzed.The tensile properties of the composite yarns were simulated and calculated by employing the developed model,and the stress-strain relationship was fitted by applying a polynomial on the foundation of the proposed model.According to the results of tensile tests,the strength of the composite yarn was the highest in comparison with filament and staple yarn.Nevertheless,Young′s modulus of composite yarn was the lowest among three types of yarns.In terms of elongation,the fracture elongation of staple yarn was much lower than that of the filament and the composite yarn(Fig.2).The experimental results revealed that the tensile fracture curve of the composite yarn comprised three stages(Fig.3).In the first stage,the stress and strain of the yarn showed a linear relationship when only staple yarn understood the load.In the second stage,the stress increased rapidly,and the sheath filament began to be stressed.In the final s

关 键 词：复合纱 拉伸性能 断裂特征 黏弹力学模型 强力预测 复合包芯纱 

分 类 号：TS104[轻工技术与工程—纺织工程]