检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:陈益杰 安虹宇 陈波 万均林 CHEN Yijie;AN Hongyu;CHEN Bo;WAN Junlin(Chongqing Zuohua Engineering Investigation Co.Ltd.,Chongqing 401100;Chongqing Zhongyan Industry Co.Ltd.,Chongqing 401100)
机构地区:[1]重庆卓华工程勘测有限公司,重庆401100 [2]重庆中烟工业有限责任公司,重庆401100
出 处:《土工基础》2023年第4期655-657,663,共4页Soil Engineering and Foundation
摘 要:岩石地基承载力,一般根据岩芯单轴抗压强度试验结果,经过一定的折算得出。但在实际工程中,软质岩、片状风化岩、碎裂岩等因取样困难、风化崩解、制样扰动等原因,导致或无法制样进行岩芯单轴抗压试验,或岩芯单轴抗压强度缺乏代表性。对软质岩、片状风化岩、碎裂岩场地岩石地基承载力取值的实际困难和风险进行了分析,指出验槽阶段检测单位提供的岩石单轴抗压强度存在的问题。在分析地基受力、岩芯抗压、原位载荷试验关系的基础上,提出了软质岩、片状风化岩、碎裂岩场地岩石地基承载力,必须结合试验数据、地质环境等进行综合评价,提供地基承载力的区间范围的建议。The bearing capacity of rock mass is generally estimated from the uniaxial compressive strength test results of the intact rock core.However,in the practical engineering,the soft rock,the lamellar weathered rock,and the broken rock and other reasons such as sampling difficulties,weathering,disintegration and sample preparation disturbance,result in no intact rock core or no representative intact rock core for the uniaxial compressive strength tests.In this paper,the potential difficulties,and risks of estimating the bearing capacity of the rock mass in the broken rock site are analyzed.At the same time,the problems of the uniaxial compressive strength of the intact rock provided by the testing unit during the excavation stage are provided.Based on the analysis of the relationship between foundation loading,uniaxial compressive strength test results.plate loading test results,it is proposed that the bearing capacity of the rock mass for the soft rock,the lamellar weathered rock and the broken rock sites must be comprehensively evaluation based on test data and geological environment,and the suggestions of the range of bearing capacity of the rock mass are provided.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.226.181.89