检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:郭蕾[1,2] 蔡育宏 张俊[1,2] 周猛[1,2] 王东阳 周利军[1,2] Guo Lei;Cai Yuhong;Zhang Jun;Zhou Meng;Wang Dongyang;Zhou Lijun(Key Laboratory of Railway Industry on Smart Traction Power Supply,Southwest Jiaotong University,Chengdu,Sichuan,611756,China;School of Electrical Engineering,Southwest Jiaotong University,Chengdu,Sichuan,611756,China)
机构地区:[1]西南交通大学智能牵引供电铁路行业重点实验室,四川成都611756 [2]西南交通大学电气工程学院,四川成都611756
出 处:《铁道技术标准(中英文)》2023年第8期23-29,共7页Railway Technical Standard(Chinese & English)
摘 要:牵引变压器的安全运行关乎电力系统的稳定,为识别变压器绕组故障,本文提出基于随机暂态信号捕获分析的牵引变压器绕组状态在线感知与智能评估方法。首先获取牵引变压器绕组的端口暂态电信号,得到变压器绕组的频响曲线,然后结合频响曲线的幅频特性和相频特性转化为灰度图,根据灰度图提取图像的灰度梯度共生矩阵的纹理特征,根据提取的8个纹理特征计算特征关联度(FCD)来识别绕组故障,最后在一台试验牵引变压器上进行局部翘曲的故障模拟。结果表明,由端口暂态电信号的频响曲线转化得到的灰度图在不同故障程度下存在差异,绕组不同故障位置的特征关联度(Features Correlation Degree,FCD)数值有明显不同,且不同故障程度有其相应规律,根据灰度图提取的8个图像特征与相应的特征关联度,可区分牵引变压器局部翘曲故障情况下故障位置与故障程度。The safe operation of traction transformer is critical for the stability of power system.To identify transformer winding faults,this paper proposes an online sensing and intelligent assessment method for the traction transformer winding state based on the stochastic transient signal capture analysis.Firstly,we obtain the port transient electrical signals of the traction transformer windings and get the frequency response curves of the transformer windings.Then,combining with the amplitude-frequency and phase-frequency characteristics of the frequency response curves,the grayscale maps are generated.Texture features are extracted from these grayscale maps using gray gradient covariance matrices,and the feature correlation degree(FCD)is calculated according to the eight extracted texture features to identify winding faults.Finally,a local buckling fault simulation is performed on a test traction transformer.The results show that the grayscale maps obtained from the frequency response curves of the port transient electrical signals exhibit differences under different fault degrees.The FCD values for different faulty windings are significantly different,and there are corresponding laws for different fault degrees.The eight image features and the their respective FCD values,extracted from the grayscale maps,can distinguish the fault location and fault degree in the case of partial warping faults of traction transformer.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.21.93.159