柱锥结合药型罩射流成型及侵彻威力数值模拟  

Numerical simulation on the jet formation of cylinder-cone liner

作　　者：王一凡 王志军[1] 徐永杰[1,2] WANG Yifan;WANG Zhijun;XU Yongjie(School of Mechatronic Engineering,North University of China,Taiyuan 030051,China;ChongqingHongyu Precision Industry Co.,Ltd.,Chongqing 402760,China)

机构地区：[1]中北大学机电工程学院,太原030051 [2]重庆红宇精密工业集团有限公司,重庆402760

出　　处：《兵器装备工程学报》2023年第9期261-265,322,共6页Journal of Ordnance Equipment Engineering

基　　金：山西省基础研究计划项目(2021690);山西省高等学校科技创新项目(2020299)。

摘　　要：采用有限元软件Autodyn对柱锥结合药型罩在爆炸载荷下射流成型及侵彻性能进行了数值模拟,分析了圆柱罩部分直径及长度的尺寸效应,得到射流速度、有效长度、侵彻深度、穿孔直径等参数。研究结果表明:柱锥结合药型罩可以形成头部速度更高、侵彻能力更强的射流,随着圆柱部分直径和长度的增大,射流头部速度达到8110 m/s;当圆柱部分直径取30 mm,长度取20 mm时,聚能装药在最佳炸高下能完全穿透550 mm厚的钢靶。By using finite element software Autodyn,numerical simulation of jet forming and penetration performance of the cylinder-cone liner under explosion load is carried out.The size effects of the diameter and length of the cylindrical liner are analyzed,and the parameters of jet velocity,effective length,penetration depth and perforation diameter are obtained.The results show that the jet with higher head speed and stronger penetration ability can be formed by the cylinder-cone liner.The jet velocity is 8110 m/s with the increase of the diameter and length of the cylinder.When the diameter of the cylinder is 30 mm and the length is 20 mm,the shaped charge can completely penetrate the steel target with thickness of 550 mm at the most advantageous standoff.

关 键 词：柱锥结合药型罩 射流 侵彻深度 数值模拟 炸高 

分 类 号：TJ410.3[兵器科学与技术—火炮、自动武器与弹药工程]