检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:张樱子 邱隆清[2] 荣亮亮[2] 刘改改 王晨[1] 刘文怡[1] Zhang Yingzi;Qiu Longqing;Rong Liangliang;Liu Gaigai;Wang Chen;Liu Wenyi(State Key Laboratory of Dynamic Testing Technology,North University of China,Taiyuan 030051,China;Shanghai Institute of Microsystem and Information Technology,Chinese Academy of Sciences,Shanghai 200050,China)
机构地区:[1]中北大学省部共建动态测试技术国家重点实验室,太原030051 [2]中国科学院上海微系统与信息技术研究所,上海200050
出 处:《低温与超导》2023年第8期12-16,75,共6页Cryogenics and Superconductivity
基 金:国家自然科学基金青年科学基金(62201523);山西省基础研究计划项目(20210302124329)资助。
摘 要:针对磁异常目标远距离定位的问题,本文提出了一种基于超导磁梯度张量探测系统的单点定位方法。通过测量观测点处的一阶磁梯度张量与磁总场强度即可实现对磁异常源的实时定位。仿真结果表明,探测距离为1000 m时,该定位方法的最大相对定位误差为5.27%。实验结果表明,探测距离为128 m时,该定位方法的最大相对定位误差为5.47%,可满足超导磁梯度张量探测系统远距离实时定位的需求。To solve the problem of remote localization of magnetic anomaly source,a single point localization method based on superconducting magnetic gradient tensor detection system was proposed.The magnetic anomaly source could be located in real time by measuring the first order magnetic gradient tensor and the total magnetic field intensity at the observation point.The simulation results show that the maximum relative positioning error of this method is 5.27%when the detection distance is 1000 m.The experimental results show that the maximum relative positioning error of this method is 5.47%when the detection distance is 128 m,which can meet the requirement of remote real-time localization of the superconducting magnetic gradient tensor detection system.
关 键 词:磁梯度张量 张量不变量 超导量子干涉器 定位方法
分 类 号:TH762[机械工程—仪器科学与技术]
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:18.216.45.231