船用工装脚手架三维模拟搭设技术  

Three Dimensional Virtual Setup Technology of Marine Tooling Scaffold

作　　者：马川 MA Chuan(COSCO Shipping Heavy Industry(Dalian)Co.,Ltd.,Dalian 116113,Liaoning,China)

机构地区：[1]大连中远海运重工有限公司,辽宁大连116113

出　　处：《船舶标准化工程师》2023年第5期15-18,共4页Ship Standardization Engineer

摘　　要：为提高设计效率、降低设计成本,对船用工装脚手架三维模拟搭设技术的设计方法、避碰干涉、成本效率等方面进行介绍,对三维模拟搭设的优缺点进行分析,并提出一种针对散货船货舱区域结构类型的工装脚手架三维建模设计方法。结果表明:该方法可有效提高模型搭建速度。研究成果可为船用工装脚手架三维模拟搭设提供一定参考。In order to improve the design efficiency and reduce the design cost,the design method,collision avoidance and interference,cost efficiency and other aspects of the three-dimensional virtual setup technology of the marine tooling scaffold are introduced,the advantages and disadvantages of the three-dimensional virtual setup are analyzed,and a three-dimensional modeling design method of the tooling scaffold for the structural type of the cargo hold area of the bulk carrier is proposed.The results show that this method can effectively improve the modeling speed.The research results can provide some references for the 3D simulation of marine tooling scaffold.

关 键 词：工装脚手架 三维建模 模拟搭设 

分 类 号：U662.2[交通运输工程—船舶及航道工程]