检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:周涛[1] 苏润丰 涂学凑[1,2] 吴敬波 陈健[1,2] 吴培亨 ZHOU Tao;SU Runfeng;TU Xuecou;WU Jingbo;CHEN Jian;WUPeiheng(Research Institute of Superconductor Electronics,Nanjing University,Nanjing 210023,China;PurpleMountainLaboratory,Nanjing,211111,China)
机构地区:[1]南京大学超导电子学研究所,江苏南京210023 [2]紫金山实验室,江苏南京211111
出 处:《低温物理学报》2023年第3期131-141,共11页Low Temperature Physical Letters
基 金:国家自然科学基金(批准号:62004093,62035014,62227820);中央高校经费;江苏省电磁波先进调控技术重点实验室资助的课题。
摘 要:超导动态电感探测器(Kinetic Inductance Detectors, KIDs)作为一种新型的超导探测器,在天文学等领域得到了广泛应用,具有高灵敏度、高能量分辨率等优点,并且可以通过频域复用直接扩展到大型阵列.然而,为了支持上千像素的探测,KIDs阵列需要产生复杂的频梳信号,占用较大的信号带宽.因此,数模转换器件(Digital-to-Analog Converter, DAC)的采样率对于KIDs阵列的读出电路实现至关重要.基于JESD204B传输协议的高速DAC相较于传统低电压差分信号(Low-Voltage Differential Signaling, LVDS)协议的转换器具有更高的采样率和传输速率,可用于频梳信号波形的产生.为此,本文提出了一种基于现场可编程门阵列(Field Programmable Gate Array, FPGA)的设计,以Xilinx公司Kintex-7系列FPGA为主控芯片,通过高速串行接口JESD204B和高速DAC芯片AD9136实现高速数据传输,DAC采样率为2 GSPS,能生成带宽为1 GHz的基带信号.实验结果表明,该设计能够有效地生成复杂的频梳信号,具有较高的信号质量和灵活性,解决了传统DAC及直接数字频率合成(Direct Digital Synthesizer, DDS)器件难以产生复杂多变波形的难题,有助于拓展KIDs阵列的工程应用.As a novel type of superconducting detector,the kinetic inductance detectors(KIDs)have found broad applications in astronomy and other fields due to their superior characteristics,including high sensitivity and energy resolution.Moreover,KIDs can be directly extended to a large array by frequency domain multiplexing.However,generating complex frequency comb signals for KIDs arrays to support the detection of thousands of pixels requires a substantial signal bandwidth.Therefore,the sampling rate of the digital-to-analog converter(DAC)is crucial for the readout circuit implementation of the KIDs arrays.Compared with traditional Low-Voltage Differential Signaling(LVDS)protocol converters,high-speed DACs based on the JESD204B transmission protocol offer higher sampling rates and transmission speeds,making them suitable for generating frequency comb signal waveforms.In this regard,we propose a design based on Field Programmable Gate Aray(FPGA),utilizing the Xilinx Kintex-7 series FPGA as the main control chip,and JESD204B high-speed serial interface and high-speed DAC chip AD9136 for high-speed data transmission.The DAC sampling rate of 2 GSPS can generate a baseband signal with a bandwidth up to 1 GHz.The proposed design provides effective solutions to the challenge of generating complex frequency comb signals with high signal quality and flexibility.It overcomes the limitations of traditional DACs and direct digital synthesizer(DDS)devices in generating complex and diverse waveforms.Therefore,it has the potential to facilitate the engineering application of KIDs arrays.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:3.137.142.253