铝合金铸轧辊凸度设置因素的研究分析  

Research and Analysis on the Factors Affecting the Crown Setting of Aluminum Alloy Casting Roll

作　　者：李逢科 LI Fengke(Gansu Dongxing Jiayu New Materials Co.Ltd.,Jiayuguan735100,China)

机构地区：[1]甘肃东兴嘉宇新材料有限公司,甘肃嘉峪关735100

出　　处：《甘肃冶金》2023年第5期107-109,共3页Gansu Metallurgy

摘　　要：分析了铝合金铸轧辊凸度参数设置的影响因素,并通过试验验证了铸轧辊辊凸设置曲线变化情况。结果表明:对于辊凸设置时,不仅要考虑铸轧速度、冷却水温、铸轧区长度等生产工艺参数,还须对轧辊受力后挠曲度变形以及材料特性等因素充分考虑。The influencing factors of aluminum alloy casting roll crown parameter setting were analyzed,and the change of roll crown setting curve was verified by experiments.The results show that the process parameters such as casting and rolling speed,cooling water temperature and length of casting and rolling zone should be taken into account,as well as the flexural deformation and material properties.

关 键 词：铝合金铸轧 铸轧辊凸度 挠曲度 

分 类 号：TG333.17[金属学及工艺—金属压力加工]