Edge crack damage analysis of AZ31 magnesium alloy hot-rolled plate improved by vertical roll pre-rolling  

作　　者：Zhiquan Huang Chuanlu Qi Jinchao Zou Hongyu Lai Hao Guo Junpeng Wang 

机构地区：[1]School of Mechanical Engineering,Taiyuan University of Science and Technology,Taiyuan 030024,China [2]Nsk(China)Research&Development Co.,Ltd.,Kunshan 215332,China

出　　处：《Journal of Magnesium and Alloys》2023年第6期2151-2164,共14页镁合金学报(英文)

基　　金：supported by the National Natural Science Foundation of China(52075357);the national key R&D plan project(2018YFA0707301);the key Research Science and Technology Innovation of Shanxi Province(201803D121026);Shanxi Province Science and Technology Major Project(20181102016);Open Research Fund of State Key Laboratory of High Performance Complex Manufacturing,Central South University(Kfkt2019–03)。

摘　　要：In the present study,through vertical roll pre-rolling of AZ31 magnesium alloy hot-rolled plate at room temperature,the effect of different vertical roll pre-rolling reduction on edge crack of the plate during flat rolling was systematically studied.The evolution of microstructure and texture in the edge and middle of the plate after vertical roll pre-rolling,heating and rolling was analyzed by using EBSD technology.The results show that during the vertical roll pre-rolling,{10–12}primary twins and{10–12}-{10–12}secondary twins dominated the edge deformation,while{10–12}primary twins dominated the middle deformation.With the increase of vertical roll pre-rolling reduction,the twin volume fraction of the edge and the middle increased,and the difference between them decreased gradually.After heating,the twin orientation caused by vertical roll pre-rolling was still maintained,and there was a significant difference in grain size between the edge and the middle.When the reduction rate of flat rolling was 30%,cracks have already appeared in the initial plate,while the vertical roll pre-rolled samples showed extremely high rolling performance.When the reduction rate of flat rolling was 50%,the 8PR sample still had no crack initiation.In addition,after flat rolling of 50%,the initial plate showed a strong basal texture,while the maximum pole density of the 8PR plate was small,and the texture distribution was very scattered,showing the characteristics of weak orientation.

关 键 词：AZ31 magnesium alloy Vertical roll pre-rolling Edge crack {10–12}Twins TEXTURE 

分 类 号：TG339[金属学及工艺—金属压力加工]