检索规则说明:AND代表“并且”;OR代表“或者”;NOT代表“不包含”;(注意必须大写,运算符两边需空一格)
检 索 范 例 :范例一: (K=图书馆学 OR K=情报学) AND A=范并思 范例二:J=计算机应用与软件 AND (U=C++ OR U=Basic) NOT M=Visual
作 者:刘佳 宋兆阳 李思洁 周明东[1] 李蕾 凌凤香 LIU Jia;SONG Zhao-yang;LI Si-jie;ZHOU Ming-dong;LI Lei;LING Feng-xiang(LiaoNing Petrochemical University,Fushun 113001,China;SINOPEC(Dalian)Research Institute of Petroleum and Petrochemicals Co.,Ltd,Dalian 116045,China)
机构地区:[1]辽宁石油化工大学石油化工学院,辽宁抚顺113001 [2]中石化(大连)石油化工研究院有限公司,辽宁大连116045
出 处:《燃料化学学报(中英文)》2023年第10期1441-1452,共12页Journal of Fuel Chemistry and Technology
基 金:中国石油化工股份有限公司资助项目(420014)资助。
摘 要:采用硅铝比相近的Y分子筛、ZSM-5分子筛和β分子筛分别负载贵金属约0.5%Pt制备催化剂,通过XRD、XRF、TEM、N_(2)物理吸附-脱附、NH_(3)-TPD、Py-FTIR、^(27)Al核磁等手段研究了不同拓扑结构分子筛晶体结构、元素组成、孔结构、酸性以及Al分布的差异,进而考察了拓扑结构对催化剂催化正十二烷异构化反应性能的影响。结果表明,当硅铝比接近时,ZSM-5分子筛总酸量及骨架铝比例最高、平均孔径最小,Y分子筛总酸量及骨架铝比例最低、平均孔径最大,而β分子筛的总酸量、骨架铝比例以及平均孔径介于两者之间,说明不同拓扑结构分子筛硅铝原子组合方式不同,不仅影响孔道结构和孔口尺寸,而且会因为铝所处位置的不同而影响酸性;在正十二烷异构化反应中,Pt/ZSM-5催化剂活性最高且主要发生的是外表面无选择性反应,Pt/Y催化剂活性最低且异构化反应主要在孔道内,而Pt/β催化剂活性介于两者之间,异构化反应发生于孔口处以锁匙反应为主。The catalysts were prepared by loading about 0.5%Pt noble metal on Y molecular sieves,ZSM-5 molecular sieves andβmolecular sieves with similar Si/Al ratios.The crystal structures of the molecular sieves with different topologies,elemental compositions,pore structures,activities,and Al distributions were investigated by means of XRD,XRF,TEM,N_(2) physical adsorption and desorption,NH_(3)-TPD,Py-FTIR,and ^(27)Al NMR.And then the effect of topology on the catalytic performance of n-dodecane isomerization reaction was investigated.The results showed that when the Si/Al ratios were close to each other,the ZSM-5 molecular sieve had the highest total acid and skeleton Al ratio and the smallest average pore size,the Y molecular sieve had the lowest total acid and skeleton Al ratio and the largest average pore size,and theβmolecular sieve's total acid,skeleton Al ratio,and average pore size were between the two others,which indicated that different topologies of the molecular sieves with different combinations of Si/Al atoms affected not only the structure of the pores and the size of the pore but also the number of acidity.In the n-dodecane isomerization reaction,the Pt/ZSM-5 catalyst had the highest activity and the main reaction occurred on the outer surface without selectivity,the Pt/Y catalyst had the lowest activity and the isomerization reaction mainly occurred inside the pores,while the Pt/βcatalyst had the activity between the other two catalysts and the isomerization reaction occurred dominantly at the pore opening as the key-locking reaction.
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在载入数据...
正在链接到云南高校图书馆文献保障联盟下载...
云南高校图书馆联盟文献共享服务平台 版权所有©
您的IP:216.73.216.49