瓷砖抛光机圆周摆动式横梁的结构设计  

Structural Design of Circular Swinging Beam of Ceramic Tile Polishing Machine

作　　者：宋福康[1] 江风云[1] 应春明 SONG Fu-kang;JIANG Feng-yun;YING Chun-ming(College of Physical Science and Engineering Technology,Yichun University,Yichun 336000,China;Jiangxi Yi Ben Machinery Equipment Co.Ltd.,Gao’an 330813,China)

机构地区：[1]宜春学院物理科学与工程技术学院,江西宜春336000 [2]江西一本机械设备有限公司,江西高安330813

出　　处：《宜春学院学报》2023年第9期34-36,共3页Journal of Yichun University

基　　金：江西省重点新产品计划项目“JPYB1800圆摆抛光机”(编号:S2020CXCPB0182)。

摘　　要：瓷砖抛光机横梁大都采用直线往复摆动式,这种形式的抛光机结构较为简单,但其磨出的瓷砖存在诸多不足:一是光泽度不均匀、平整度不稳定;二是瓷砖不能被磨头完全覆盖,产生所谓的“空白三角”现象;三是叠件、缺陷瓷砖进入抛光区后,在磨头的强力作用下易出现瓷砖瞬间爆裂的所谓“炸机”现象。为了克服这些问题,设计了一种圆周摆动式横梁,采用这种横梁的抛光机磨出的瓷砖光泽度达到50°-65°,平整度偏差小于±0.2%。Most cross beams of the tile polishing machine use linear reciprocating swing type,this form of polishing machine structure is relatively simple.But there are many shortcomings in the grinding of the tile by linear reciprocating swing type tile polishing machine.First,the gloss of the tile is not uniform,the flatness is unstable.Second,the tile can’t be completely covered by the grinding head,which resulting in the so-called“blank triangle”phenomenon.The third is that after the stacked and defective tiles enter the polishing area,the so-called“explosion machine”phenomenon that the tiles burst instantly under the strong action of the grinding head is easy to occur.In order to overcome these problems,a circular oscillating beam is designed,and the polishing machine with this beam grinds out the gloss of the tile to 50°-65°,and the flatness deviation is less than±0.2%.

关 键 词：抛光机 缺陷 横梁部件 结构设计 圆周摆动 

分 类 号：TH122[机械工程—机械设计及理论]