运动内衣承托及其动态舒适性能的有限元分析  

Finite element analysis of supportive performance and dynamic comfort of sports bra

作　　者：孙玥 周凌芳 周祺旋 张诗晨 易洁伦[5] SUN Yue;ZHOU Lingfang;ZHOU Qixuan;ZHANG Shichen;YICK Kit-lun(School of Fashion Design&Engineering,Zhejiang Sci-Tech University,Hangzhou,Zhejiang310018,China;Apparel Engineering Research Center of Zhejiang Province,Hangzhou,Zhejiang310018,China;Zhejiang Provincial Engineering Laboratory of Clothing Digital Technology,Hangzhou,Zhejiang310018,China;School of Innovation Design,Guangzhou Academy of Fine Arts,Guangzhou,Guangdong510000,China;School of Fashion&Textiles,The Hong Kong Polytechnic University,Hong Kong999077,China)

机构地区：[1]浙江理工大学服装学院,浙江杭州310018 [2]浙江省服装工程技术研究中心,浙江杭州310018 [3]服装数字化技术浙江省工程实验室,浙江杭州310018 [4]广州美术学院工业设计学院,广东广州510000 [5]香港理工大学时装及纺织学院,中国香港999077

出　　处：《纺织学报》2023年第9期180-187,共8页Journal of Textile Research

基　　金：浙江理工大学科研启动基金项目(20072324-Y)。

摘　　要：为对运动内衣的功能性和舒适性进行可量化预测及评估,缩短内衣行业的产品设计开发流程,对人体和运动内衣的动态接触关系建立有限元模型,并研究乳房在运动过程中与运动内衣的复杂相互作用机制。首先通过三维人体扫描获得人体点云数据,运用逆向工程软件进行处理,得到胸部、身体躯干和运动内衣的几何模型。利用过盈配合方法模拟人体穿着运动内衣的预紧力状态,并在重力场中加入三维运动系统捕捉的躯干动态位移作为边界条件来驱动有限元模型,从而模拟人体穿着运动内衣时的乳房运动形态。模拟结果与真实测量值的相对误差为5.15%,验证了此模型的准确性。在此模型的基础上进一步对运动内衣面料的力学属性进行参数化设计,研究了5倍初始弹性模量的运动内衣对乳房的控制性能和动态压力舒适性。结果表明,使用高弹性模量材料的运动内衣虽然能轻微增加对胸部位移的控制效果,但相应增加的人体服装压已经高于人体舒适的服装压力范围。本文提出的研究方法和结果可从功能性和舒适性角度综合指导运动内衣的面料选择,优化运动内衣的设计并缩短开发时间。Objective Without the adequate support and protection,females′breasts would suffer from troubles such as ligament rupture and mastitis during physical activities.Wearing sports bra could limit the movement of breasts,thus reducing the pain or discomfort during exercises.In order to predict and evaluate the function and comfort of sports bra,as well as to reduce the process of product design and development for intimate apparel industry,a dynamic contact finite element(FE)modeling system for human body and sports bra was constructed to evaluate the performance of sports bra with different design features from the aspects of control level and contact pressure.Method The data of female chest was obtained by 3-D body scanner to obtain the geometric model of breasts,body torso and sports bra.The method of interference fit was adopted to simulate the pre-tension of the breasts and sports bra after wearing.The displacement of the torso obtained from the motion capture system was used as the boundary condition to drive the finite element model under the gravity field.The motion of the breasts after wearing sports bra was simulated by this FE model and a parametric study was also conducted for different material parameters of the sports bra.Results The simulated results from the constructed FE contact model between human body and sports bra was validated with the motion capture experiment in terms of the nipple displacement.The calculated relative average absolute error was 4.13%(braless condition)and 5.15%(wearing sports bra)which denoted the accuracy of the FE method.Based on the numerical model,a parametric study was conducted to investigate different fabric materials on the control performance and wearing comfort.A virtual sports bra(SPB2)with higher Young′s modulus,which was 5 times than the original tested sample SPB1,was introduced into the FE contact model.The maximum motion displacement of nipple when wearing SPB1 was 235.043 mm,while that was 228.861 mm for SPB2.The control effect of breast movement by SPB2

关 键 词：运动内衣 承托性能 动态舒适性 乳房位移 接触压力 有限元模型 

分 类 号：TS941.2[轻工技术与工程—服装设计与工程]