BIOLAK-L工艺脱氮除磷提标改造工程实例  

An upgrading and reconstruction project example of BIOLAK-L process removing nitrogen and phosphorus

作　　者：朱大成 柴春省 闫广强 王宇健 秦承刚 ZHU Dacheng;CHAI Chunsheng;YAN Guangqiang;WANG Yujian;QIN Chenggang(Zaozhuang Ecological and Environmental Monitoring Centre,Zaozhuang 277800,China;Zaozhuang Construction Quality Service Centre,Zaozhuang 277800,China;Tengzhou Ecological Environment Monitoring Center,Tengzhou 277500,China;Yantai Ecological and Environmental Monitoring Centre,Yantai 264000,China)

机构地区：[1]山东省枣庄生态环境监测中心,山东枣庄277800 [2]枣庄市工程质量安全服务中心,山东枣庄277800 [3]滕州生态环境监控中心,山东滕州277500 [4]山东省烟台生态环境监测中心,山东烟台264000

出　　处：《工业用水与废水》2023年第5期74-78,92,共6页Industrial Water & Wastewater

摘　　要：通过分析某污水厂BIOLAK-L工艺在实际运行中存在的问题,针对性地给出了提标改造工艺方案,对原BIOLAK-L工艺的好氧区、沉淀池增设导流墙,封堵洞口,增设推流器,将其改造为AAO工艺,新建高效混凝沉淀池、纤维转盘滤池等深度处理工艺,实现脱氮除磷提标改造的目的。改造后出水各项指标均优于GB18918—2002《城镇污水处理厂污染物排放标准》的一级A标准,生化系统对TN的去除率由40%~58%提高到73%~79%,新建深度处理单元对SS、TP去除率分别为85%~91%、62%~77%,达到了提标改造的目标。Through analyzing the problems existing in the actual operation of the original BIOLAK-L process in a sewage treatment plant,a pertinent upgrading and reconstruction process scheme was pointed out.The aerobic zone and sedimentation tank of the original process were modified into AAO process by adding diversion wall,plugging hole,adding impeller.Several advanced treatment techniques such as:high-efficiency coagulation sedimentation tank,fiber turntable filter,and so on,were newly built so as to realize the goal of nitrogen and phosphorus removal.The effluent water indexes of the modified project were all superior to the requirement of level A grade 1 in GB 18918—2002 Discharge standard of pollutants for municipal wastewater treatment plant,the removal rates of TN in the biochemical system increased from 40%-58%to 73%-79%,the removal rates of SS and TP in the newly built treatment unit reached 85%-91%and 62%-77%respectively,which achieved the goal of upgrading and reconstruction.

关 键 词：BIOLAK-L工艺 脱氮除磷 提标改造 AAO工艺 

分 类 号：X703.1[环境科学与工程—环境工程] X505