ZJ118卷接机组VE工艺参数对烟支质量稳定性影响  

Effects of VE process parameters of ZJ118 cigarette maker on cigarette quality stability

作　　者：燕振振 王永红[2] 王柏朝 贾春乾 柯伟 焦琨 史建新[2] 王文成[1] 马治国[1] 王东燕 王丹 王虹 YAN Zhenzhen;WANG Yonghong;WANG Baichao;JIA Chunqian;KE Wei;JIAO Kun;SHI Jianxin;WANG Wencheng;MA Zhiguo;WANG Dongyan;WANG Dan;WANG Hong(Yan'an Cigarette Factory,China Tobacco Shaanxi Industrial Co.,Ltd.,Yan'an 716000,Shaanxi,China;Technology Center,China Tobacco Shaanxi Industrial Co.,Ltd.,Baoji 721013,Shaanxi,China)

机构地区：[1]陕西中烟工业有限责任公司延安卷烟厂,陕西省延安市716000 [2]陕西中烟工业有限责任公司技术中心,陕西省宝鸡市721013

出　　处：《中国烟草学报》2023年第5期55-60,共6页Acta Tabacaria Sinica

基　　金：陕西中烟工业有限责任公司科技项目“适用于中细支和中高档卷烟丝状梗丝技术研究”(BA000-ZB19005)。

摘　　要：【目的】探究ZJ118卷接机组VE工艺参数对烟支质量稳定性的影响。【方法】通过VE工艺参数正交试验确定最佳设置参数,并探究对烟支物理指标的影响。【结果】(1)二次分选阀开度、针辊供丝量系数是影响端部落丝的主要因素,二次分选阀开度越小、针辊供丝量系数越大,端部落丝情况越小。(2)针辊供丝量系数对重量标偏影响最大,针辊供丝量系数越大,重量标偏越小。(3)针辊供丝量系数对吸阻标偏影响最大,二次分选次之,风室设定负压与一次分选影响最小。针辊供丝量系数为50%,吸丝负压设定为8200Pa,一次分选压力在设备工艺范围内,二次分选阀开度在质量工艺要求范围内越小越好,此时烟支质量稳定性较好。This study aims to explore the effects of VE process parameters of ZJ118 cigarette maker on cigarette quality stability.The optimal setting parameters were determined through orthogonal experiments of VE process parameters,including quantity coefficient of cut tobacco supplied by the needle roller,negative pressure of VE,primary sorting pressure,valve opening of secondary sorting,and their effects on the physical characteristics of cigarettes were investigated..The results show that:1)Valve opening of secondary sorting and quantity of cut tobacco supplied by the needle roller are the main factors affecting the tobacco loss from cigarette end.The smaller the valve opening of secondary sorting is,the larger the quantity of cut tobacco supplied by needle roller is,and the smaller the tobacco loss from cigarette end will be.2)Quantity coefficient of cut tobacco supplied by needle roller has the greatest influence on the weight standard deviation,When the quantity of cut tobacco supplied by needle roller is larger,weight standard deviation will be smaller.3)Quantity coefficient of cut tobacco supplied by needle roller has the largest influence on the standard deviation of draw resistance,followed by valve opening of secondary sorting,the negative pressure of VE,and primary sorting pressure has the smallest influence.When the quantity coefficient of cut tobacco supplied by needle roller is 50%,the negative pressure of VE is set to(8200Pa),and a smaller opening of the secondary sorting valve is preferable within the quality process requirement range for better stability in cigarette quality.

关 键 词：ZJ118卷接机组 VE工艺参数 烟支质量 稳定性 

分 类 号：TS43[农业科学—烟草工业]