三维扫描和打印技术在压力容器检验中的应用探析  

Application of 3D Scanning and Printing Technology in Pressure Vessel Inspection

作　　者：韩鹏飞 王正方[2,3] 肖吉敏 李凯[3] 张金成 HAN Pengfei;WANG Zhengfang;XIAO Jimin;LI Kai;ZHANG Jincheng

机构地区：[1]淄博市特种设备检验研究院,淄博市255030 [2]淄博职业学院机电工程学院 [3]山东理工大学机械工程学院

出　　处：《化工装备技术》2023年第5期40-44,共5页Chemical Equipment Technology

基　　金：2018年淄博市校城融合发展计划项目(特种热交换设备的制造与关键技术研发)(2018ZBXC064)。

摘　　要：目前,三维扫描和打印技术已经较为成熟,并且在各行业广泛应用。综述了三维扫描和打印技术的应用现状,分析了其在在制压力容器检验检测和定期检验中的应用,阐述了利用三维扫描和打印技术进行压力容器检验检测的技术路线,同时对压力容器中的缺陷模型进行了试打印,取得了不错的实际效果。At present,3D scanning and printing technology is relatively mature and widely used in various industries.The current application status of 3D scanning and printing technology had been reviewed,and its application in the inspection and regular inspection of pressure vessels had been analyzed.The technical route of using 3D scanning and printing technology for pressure vessel inspection and detection had been elaborated.At the same time,defect models in pressure vessels had been tested and printed,and good practical results had been achieved.

关 键 词：三维扫描和打印 压力容器 检验检测 

分 类 号：T19[一般工业技术]